Page 64
HANAU, GERMANY — The use of electric motors in the automo- tive sector is rapidly increasing, resulting in greater EMC chal- lenges. These are often only detected in later phases of product development or even in close-to- production testing. This demands quickly available products that enable short-term EMC solutions and do not incur product-specific tooling or qualification costs. VACUUMSCHMELZE (VAC) is now offering a solution with its standard series of toroidal cores and inductive components. The tape-wound cores and
www.us-tech.com
inductive components, qualified according to AEC-Q200, are based on the company’s nanocrystalline, soft magnetic material VITROP- ERM®. Compared to conventional
ferrite solutions or other amor- phous materials, nanocrystalline VITROPERM offers a variety of advantages. The technical parameters
July, 2021 EMC-Resistant Cores and Inductors from VAC
Magnetic cores containing VITROPERM.
allow a very compact design, so the EMC solution can be used in a wide variety of applications, even in small existing installa- tion spaces. The permeability values for toroidal cores are µ- 30,000 and µ-100,000, and for oval cores are µ-30,000 and µ- 70,000. In addition, the cores have a high saturation flux den- sity of 1.2T and can be used almost temperature-independ-
Testing of electronics in the era of miniaturization
25+ years in the heart of electronics
Customers in 50+ countries
10,000+ systems sold 2,500+ customers
Worldwide support
ently in a range of –40 to +302°F (–40 to +150°C). In the standard VAC series,
ring and oval cores as well as cur- rent compensated chokes for com- mon mode suppression are avail- able in different dimensions and
with varied permeability levels. Contact: VACUUM-
SCHMELZE GmbH & Co. KG, Grüner Weg 37, 63450 Hanau, Germany % +49-0-6181-38-0 E-mail:
info@vacuumschmelze.com Web:
www.vacuumschmelze.com
Z-AXIS Adds Xeltek SuperBot IC Programmer
PHELPS, NY — Z-AXIS has added a Xeltek SuperBot 5e robotic IC programmer at its electronics design and contract manufacturing center near Rochester, New York. The robot- ic system replaces an earlier model, and processes ICs three times faster and reliably handles the latest fine-pitch IC packages.
Xeltek SuperBot IC programmer.
assemblies (PCBAs)
Many printed circuit board feature
embedded software or firmware, stored in microcontrollers or flash memory chips on the board. By programming these ICs in- house for its customers, Z-AXIS eliminates the three- to four- week lead time of buying pre- programmed ICs from distribu- tors. The company can offer same-day turnaround of soft- ware updates for PCBAs in pro- duction. With the robotic system, in-house programmed ICs are about a third of the cost of buy- ing from distributors in the pro- duction volumes that Z-AXIS’ contract manufacturing cus- tomers typically need. For prototype and very low-
Get the white paper
Want to know more about our solutions and products? Contact us at 410-770-4415, send an email to
info@jtag.com or visit our website at
www.jtag.com.
volume work, ICs are typically programmed manually — either in-circuit or by a hand-loaded IC programmer. For production vol- umes, the SuperBot 5e robotic IC programmer is used to process up to 2,100 ICs per hour, which is twenty times faster than manual IC programming, and eliminates
nearly all of the labor costs. Contact: Z-AXIS, Inc., 1916
Route 96, Phelps, NY 14532 % 315-548-5000
E-mail:
sales@zaxis.net Web:
www.z-axis.net
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
