KEEGUARD Kee Safety
JSP EVO 5 DUALSWITCH JSP
JSP's EVO 5 Dualswitch is the only helmet which is certified to both EN397 and EN12492 on one certificate, with the ability to change between the two standards easily at the flick of a switch. This changes the retention strength of the helmet’s fully adjustable 4-point chinstrap to give conformity to either the construction helmet EN397 or the climbing helmet standard of EN12492 for working at height.
Simply flick the switch up when working at ground level to give the chinstrap a release force between 15-25kg for EN397 so the helmet can release if snagged or switch down to give the chinstrap a release force of greater than 50kg for EN12492 to limit the risk of losing the helmet in a fall from height.
The patent pending EVO 5 Dualswitch meets all requirements of the ANSI Z89.1-2009 Type I Class C for helmet safety as well as the Canadian CSA Z94.1-05 Type 1 Class C standards. EN 397 and EN 12492 standards are also met with the robust Expanded Polypropylene liner for class leading impact protection, as are the EN 50365 requirements for electrical insulation when the chinstrap is set to EN397 position. It will also meet the optional requirements of the EN 397 standard for lateral deformation and use in low temperatures.
www.jspsafety.com 16 AWARDS 2019
Falls from height are one of the biggest causes of death and serious injury in the workplace. All rooftops should be guarded by a fall protection system to ensure safe and efficient maintenance programmes. Help is at hand through global safety specialist, Kee Safety, who provides fall protection solutions that eliminate many of the unnecessary risks that are taken every day by people working at heights and complying fully with all relevant regulations.
Fall protection can be achieved with the use of KeeGuard system. Compatible with a range of roof membranes, including concrete, asphalt, PVC membrane, metal and felt, KeeGuard offers a free- standing roof edge protection system capable of keeping workers on the roof safe without endangering the roof membrane itself. It does not penetrate the roof surface and can be used on flat roofs up to 10° slope.
Employing a proven counterweight system, KeeGuard combines a non-slip secure base with galvanised fittings and tube arranged in a modular configuration. Fully modular and versatile enough to adapt to most roof edge profiles and level changes, sections can be easily taken down and re-erected as necessary.
Designed for optimum safety, the complete KeeGuard system complies fully with all legislative requirements and even allows for an integral kickboard fixing to further save time and cost on site. The recycled PVC base weights used with KeeGuard bring a number of advantages, particularly making installation quicker and easier, thus saving time and money.
www.keesafety.co.uk
https://www.surveymonkey.co.uk/r/THSawards2019 CLICK HERE to vote for your favourite...
VOTE NOW
2
0
1
9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32
