This page contains a Flash digital edition of a book.
product news/產品新聞


Critical Air Pressure indications help locate vents and overflows


关键气压指数帮助确定 排气孔和溢流孔的位置


time, handling and machining of the component. The cast weight was reduced with-out affecting the properties and functional requirements. There was no requirement for a T6 heat treatment of the part, and supply chain lead time was reduced, which led to increased volumes. Magmasoft is used in the development of gating


systems for all components produced at Endur-ance. For the flywheel housing casting, a center runner and gating system was proposed. Various gating system alterna- tives were created in CAD and then evaluated by means of simulation studies. Through the optimization of the runner design and the orientation of the casting, it was possible to control the temperature drop of the metal without changing the die filling time. The Magmasoft


生产率。铸件的重量减轻了,但不影响铸件性能和功能 要求。而且,铸件不需要进行T6热处理,缩短了供应链 的交货周期,从而提高了产量。


Endurance公司生产的所有铸件,浇注系统的开发 中都使用了MAGMASOFT模拟系统。对于飞轮壳体铸 件,提出将浇道和内浇口系统设在中心位置。由CAD形 成了多种浇注系统的方案可供选用,然后通过模拟研究 进行评估。通过优化浇道设计及铸件定位,可不必改变 充型时间来控制金属液的温度降低。MAGMASOFT模 拟系统的充型结果也有助于找到排气孔和溢流孔的最佳


Final casting with gating and vent lay-out


带有浇口和排气孔定位的最终铸件 70 | FOUNDRY-PLANET.COM | MODERN CASTING | CHINA FOUNDRY ASSOCIATION March 2015


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86