DL Trade Ad 4_9:Layout 1 5/1/09 3:49 PM Page 1
THEREARENO SHORTCUTS TOA5-MILDOT
of Manncorp MC-Series pick-and-place equipment.
All nozzles are guaranteed to function
properly with the original equipment. Every nozzle manufactured by Count On Tools comes standard with a 100% satisfaction guarantee. If any customer is not 100% satisfied with the performance or quality of a product, Count On Tools will replace it or offer a full refund.
www.cotinc.com
BEST Inc Launches New Rework Stencil BEST Inc. has released the new “StikNPeel” single use flexible rework stencils. These adhesive-backed stencils offer
several advantages, such as the improved quality of the paste print as the adhesive holds the stencil coplanar to the board during printing. These stencils are made from a specialty Mylar material and are available in 4, 5 and 6 mil thicknesses. Each stencil is cut to order. The maximum size of the stencils are 4” x 4,” and are available in packages of (20) pieces.
www.solder.net
New MINI Hawk imager for
direct part mark reading Microscan
announces a new three-megapixel resolution configuration in the MINI Hawk series of compact direct part mark imagers. The MINI Hawk is designed for reading small 2D direct part marks used in medical device and electronics manufacturing industries. The MINI Hawk makes it easy for electronics and other manufacturers and their suppliers to read these codes. The imager can also consistently read symbols that are damaged, distorted or otherwise challenging.
www.microscan.com
R
Small, repeatable volumes are a challenge. But not impossible if you have been creating them as long as we have. However, to do it well, you need three things:
Dispensing Expertise in a variety of applications: micro-attach, precision fill, highly-repeatable patterns;
Feasibility Testing and process verification based on years of product engineering,material flow testing, and software control;
Micro Valve
New Products
HY-FLO™ Valve with Thermal Controls
Product Development for patented valves, dispensing cartridges, needles, and accessories.
For Micro Dispensing, there is one product line that is proven and trusted by manufacturers in semiconductor packaging, electronics assembly, medical device, and electro-mechanical assembly the world over.
DispenseLink® for Micro Volume Dispensing
www.dltechnology.com
DL Technology is a registered trademark of DL Technology LLC. DispenseLink is a registered trademark of DL Technology LLC. HY-FLO is a trademark of DL Technology LLC.
FCT Assembly debuts no-clean leaded solder paste FCT Assembly introduces the NC676 no-clean, halogen-free leaded solder paste. The paste is compatible with 63/37, 62/36/2 alloys with Type 3, 4 and 5 solder meshes. NC676 features print volume
consistency down to 12 mm circles and
www.globalsmt.net
IPC 7095 Class III resistance to voiding using both straight ramp and soak reflow profiles. The no-clean paste leaves a colorless residue that is penetrable, maximizing pin testability and results in clear, bright tin/lead solder joints on all common pad finishes.
www.fctassembly.com
Dual-monitor option released for ACE selective soldering systems A new dual monitor feature just released for ACE selective soldering machines gives the operator a large, high resolution
Global SMT & Packaging – Celebrating 10 Years – December 2010 – 47
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60