This page contains a Flash digital edition of a book.
FORMULATIONS


WATER-BASED MASCARA WITH DERMOTHIX NO. TC1-249


Phase Product A


DI Water Lucentite SWN1


1,3 BUTYLENE GLYCOL2 POLYDERM PPI-PE-PA ED2


B C D DERMOTHIX 1002


POLYDERM PPI-CO-402 POLYDERM PPI CO-2002 CUPL PIC2


Black NF-11S21 Cell-U-Lash 901 Cell-U Lash 40 1


Silica MSS-500/3111 Troycare FE023


A GLOSSY WATER BASED MASCARA THAT COATS THE LASHES SMOOTHL INCI Water


Magnesium Sodium Silicate Butylene Glycol Polyurethane-58


Disteareth-100 IPDI


PEG-40 Hydrogenated Castor Oil/IPDI Copolymer PEG-200 Hydrogenated Castor Oil/IPDI Copolymer PPG-2 Isoceteth-20 Acetate


Irox Oxides (C.I. 77499) and Triethoxycaprylylsilane Cellulose Cellulose Silica


Iodopropynyl Butylcarbamate (and) Phenoxyethanol


Y WITH NO FLAKING. THE SELF-LEVELLING RHEOLOGY ENSURES THE MASCARA NEVER STICKS TO THE SIDES OF THE CONTAINER


%


45.90 1.80 4.00


15.00 2.00


4.00 4.00 4.00


10.00 2.00 2.00 5.00


0.30


Procedure: Heat water and slowly add in Lucentite with increased over head stirring. Once Lucentite is fully dispersed add in Butylene Glycol and Polyderm PE-PA ED with continued overhead stirring. In separate beaker combine esters of phase B


and heat, once heated and dissolved add in Dermothix and stir until its dissolved. Add phase B (Oil) to phase A (Water) with high shear. Once homogenous add in powders and pigment of phase C (Colour). Cool, then add preservative.


Suppliers: 1 Kobo 2 Alzo 3 Troy Chemical


SILLY, STRINGY SPRINGY BATH JELLY PUTTY WITH DERMOTHIX 75 LIQUID NO. ASTON LR 114/15


Phase Product A


DI Water DERMOTHIX 75L1


Romol Map30K2 Euxyl K7123


C.I. 14700, 0.5% Sol. Fragrance


INCI Water


Disteareth-75 IPDI (and) Gycereth-7 Caprylate/Caprate (and) Water


Potassium Laureth Phosphate


Water (and) Sodium Benzoate (and) Potassium Sorbate Water (and) C.I. 4700 (Red 4) Parfum


A FUN WAY TO GET CLEAN AND EXPERIENCE A WIDE RANGE OF TEXTURES THAT DERMOTHIX CAN PROVIDE


%


43.35 5.50


50.00 0.80 0.15 0.20


Procedure: Combine all ingredients. Propeller stir at 150-200 rpm for several minutes until smooth, homogeneous gel forms. Suppliers: 1 Alzo 2 Eleco Chemical 3 Schulke & Mayr


LITTLE BOOK OF NOVEL TEXTURES | 9


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64