Personal Care Little Book of Novel Textures

FORMULATIONS

HYDRATING CREAM GEL NO. CRL-029-70B

Phase Product A

Water B C

Glycerin GELAID®

CPE-CF1

COSMETIC FLUID 1406 OH1 Euxyl PE 90102

THIS LIGHT CREAM GLIDES ON SMOOTHL MOISTURISATION OF THE CYCLIC-FREE GELAID® COSMETIC FLUID 1406 OH. THE GELAID®

INCI Water Glycerin (99.7%) Dimethicone and Dimethicone/Vinyl Dimethicone

Crosspolymer and Hydroxyethyl Acrylate and Sodium Acryloyl Dimethyl Taurate Copolymer Dimethicone and Dimethiconol

Phenoxyethanol and Ethylhexylglycerin

rotating sweep). Add phase C or the desired preservative. Mix until uniform. Add colorants if desired. Suppliers: 1 Innospec 2 Schülke & Mayr

COOL REVIVAL GEL NO. S0156

Phase Product A

Water B C D GELAID® CPE1

Peppermint Essential Oil Euxyl PE9010

THIS FRESH GEL, CONTAINING PEPPERMINT ESSENTIAL OIL TO GIVE A COOLING EFFECT, IS POSSIBLE DUE TO THE COMPATIBILITY OF GELAID® WITH 30% ETHANOL. IT IS PERFECT FOR TO APPL PLAY TIME IS SUFFICIENTL

INCI Aqua

Glycerin

Crosspolymer (and) Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Mentha Piperia (Peppermint) Oil Ethanol

Phenoxyethanol (and) Ethylhexylglycerin Dyes

NaOH 5% Sol. Procedure: Charge aqua into mixing vessel, with Glycerin. Once uniform add Gelaid® CPE and mix few minute to obtain a

homogeneous gel. Add sequentially ingredients of phase C. Adjust pH of the system to 4.5-5.0 with NaOH 5% solution. Supplier: 1 Innospec

BUBBLE SCRUB BUTTER NO. S0132A

Phase Product A

Water

PUREACT GLUCO C1 Empigen BS/FA2 ISELUX® 1

B C D

Macadamia Nut3 Sweet Almond Scrub3

A FOAMING BODY BUTTER WASH. ISELUX PRODUCES A CREAMY LATHER FOR SUPERBL

Y SOFT SKIN WHEN APPL

INCI Aqua

Sodium Chloride Coco Glucoside

Cocamidopropyl Betaine

Sodium Lauroyl Methyl Isethionate Sunflower Oil

BHA

Macadamia Integrifolia Shell Powder Prunus Amygdalus Dulcis Shell Powder

Dye, Fragrance, Preservative Procedure: Prepare phase A with gentle mixing and heat to 40˚C-45˚C. When the formula is uniform and Iselux® is totally

solubilised, remove from heat. While allowing cooling down to room temperature, add the pre-mix [sunflower oil – BHA]. Mix until uniform. Add Macadamia and sweet Almond shell powders and mix until the shells are uniformly incorporated. When temperature is below 30˚C, add compatible preservative, dye(s) and fragrance and mix until uniform.

Suppliers: 1 Innospec 2 Huntsman 3 A&E Connock LITTLE BOOK OF NOVEL TEXTURES | 33

qs to 100.00 0.70 6.00

10.00 23.00

50.00 0.50

0.50 0.50

qs YING THIS

SCOOPABLE SEMI-SOLID FORMULATION TO WET SKIN %

0.30

30.00 1.00 qs

qs

qs to 100.00 5.00

Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone 25.00 CPE YING TO TIRED LEGS; THE

Y LONG FOR A PLEASANT EXTENDED MASSAGE %

Y WITH THE INTENSE CPE-CF AND

CPE-CF ALLOWS FOR

COLD PROCESS MANUFACTURING AND CREATES A STABLE EMULSION SUITABLE FOR ACTIVES

%

69.00 10.00

16.00

4.00 1.00

Procedure: Add phase A to the main vessel. Mix until uniform. In a side vessel, pre-mix phase B until completely uniform. With moderate mixing, slowly add phase B to phase A. (In production, it is best to use propeller mixing with a counter

Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14 | Page 15 | Page 16 | Page 17 | Page 18 | Page 19 | Page 20 | Page 21 | Page 22 | Page 23 | Page 24 | Page 25 | Page 26 | Page 27 | Page 28 | Page 29 | Page 30 | Page 31 | Page 32 | Page 33 | Page 34 | Page 35 | Page 36 | Page 37 | Page 38 | Page 39 | Page 40 | Page 41 | Page 42 | Page 43 | Page 44 | Page 45 | Page 46 | Page 47 | Page 48 | Page 49 | Page 50 | Page 51 | Page 52 | Page 53 | Page 54 | Page 55 | Page 56 | Page 57 | Page 58 | Page 59 | Page 60 | Page 61 | Page 62 | Page 63 | Page 64