FORMULATIONS
IN-SHOWER BODY LOTION WITH SONNEBORN®
SATIN
Phase Product A B C
D
E F
Deionized Water
Carbopol Ultrez 101 Glycerin, 99%2
Euxyl PE-90103 SONNEBORN®
Softisan 1005 Lipocol SC6
Crodacos C-707
Pemulen TR-2 Polymeric Emulsifier1 NaOH (18%)
SATIN4
WET SKIN (AVOIDING THE BOTTOM OF FEET), RINSE, AND THEN TOWEL DRY
INCI Water
Carbomer Glycerin
Phenoxyethanol (and) Ethylhexylglycerin Petrolatum
Hydrogenated Coco-Glycerides Cetearyl Alcohol Cetyl Alcohol
Acrylates/C10-30 Alkyl Acrylate Crosspolymer Water (and) Sodium Hydroxide
78.20 0.20 5.00
1.00
12.00 1.00 1.50 0.50
0.20 0.40
Procedure: In main beaker, weigh phase A in a suitable beaker at ambient temperature. Sprinkle phase B onto the surface of phase A and allow to self-wet. Begin heating combined phase A and phase B to 80˚C with low speed propeller mixing. When
temperature reaches 80˚C, add phase C ingredients and mix well. In another beaker, weigh phase D ingredients and heat to 80˚C. Mix until clear and free of particles. Add phase E to phase D and mix well. Slowly add combined phase D and phase E to combined phase ABC and mix well. Add phase F to the batch and mix until emulsification is complete, increasing mixing speed as necessary. Begin cooling batch to 25˚C. At 25˚C, package in suitable containers.
Suppliers: 1 Lubrizol Advanced Materials Inc 2 Protameen Chemicals Inc 3 Schülke 4 Sonneborn LLC 5 Cremer Care 6 Vantage Specialty Ingredients 7 Croda Inc
WOMEN’S FACE CREAM WITH SONNEBORN®
Phase Product A
B C
D
Deionized Water Dissolene Na21
Ultrez 202 Botanistat PF-643 Allantoin4
Glycerin 99.55 SONNEBORN®
LILAC® 6
Crodacol C70-PA7 Dragosantol 1008 Arlacel 1657
E F
Xiameter PMX 200, 100cs9 NaOH (18%)10
HerbEx Resveratrol 0.511 ELEGANCE6
ELEGANCE INCI
Water Disodium EDTA Acrylates/C10-30 Alkl Acrylate Crosspolymer
Phenoxyethanol (and) Caprylyl Glycol (and) Ethylhexylglycerin (and) Hexylene Glycol
Allantoin Glycerin
Petrolatum
C14-22 Alkane Cetyl Alcohol Bisabolol
Glyceryl Stearate (and) PEG-100 Stearate Dimethicone
Sodium Hydroxide Butylene Glycol (and) Water (and) Resveratrol
THIS CUSHIONY FACE CREAM HAS A LIGHT APPLICATION. LEAVES SKIN FEELING SOFT AND SMOOTH
%
75.30 0.10
0.30 1.00
0.10 3.00
10.00 3.00 1.00 0.10 4.50 0.50
0.60 0.50
Procedure: In main beaker, weigh phase A. Slowly heat to 40˚C and mix until the Dissolvene Na2 has dissolved. Discontinue mixing and heating. Slowly sprinkle phase B onto the surface of the water and allow to self-wet (15-20 minutes). Using low
speed propeller mixing, begin heating combined phase A and phase B to 80˚C. At 80°C, add phase C ingredients and mix well. Maintain batch temperature at 80˚C. In another beaker, combine phase D ingredients and heat to 80˚C and mix until clear. Slowly add phase D to the batch and mix for 15 minutes or until emulsification is complete. Add phase E and mix well, increasing mixing speed as necessary. Begin cooling. At 25˚C, add phase F and mix well. Package in suitable containers.
Suppliers: 1 Akzo Nobel 2 Lubrizol Advanced Materials Inc 3 DD ChemCo 4 DSM 5 Protameen Chemicals Inc 6 Sonneborn LLC 7 Croda Inc 8 Symrise 9 Dow Corning 10 Ruger Chemical Co 11 DKSH North America Inc
FOR USE AFTER SHOWERING BUT BEFORE DRYING. APPL . LEAVES SKIN FEELING SMOOTH AND MOISTURIZED %
Y TO
LITTLE BOOK OF NOVEL TEXTURES | 49
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64