This page contains a Flash digital edition of a book.
FORMULATIONS


SMOOTH PETROLATUM CREAM WITH DERMOTHIX NO. TC1-162


Phase Product A


Water


DERMOTHIX 100 Flake1 DERMOTHIX 75 Flake1


B C


Snow White Pet USP2 LIGHT MINERAL OIL1


DERMOL CG1 Phenoxyethanol Fragrance3


INCI Water


Disteareth-100 IPDI Disteareth-75 IPDI


Petrolatum Mineral Oil


Caprylyl Glycol Phenoxyethanol


Fragrance (Apricot and Musk 295-434) (optional)


A RICH PETROLATUM CREAM THAT APPLIES SMOOTHL AN OIL


Y OR TACKY AFTER FEEL %


56.00 1.50 1.50


20.00 20.00


0.50 0.50 0.00


Procedure: Add Dermothix 100 flake to heated water (70˚C-75˚C) and mix until homogenous. Then add Dermothix-75 and mix until homogeneous. In separate beaker combine mineral oil and petrolatum and stir until mixed and uniformed. Combine


phase A (Water) and phase B (Oil) and stir until uniform and homogenous (and until all flakes are dissolved). Cool and add phase C fragrance (optional) and preservative.


Suppliers: 1 Alzo 2 Penreco 3 Alpine


DERMOTHIX CONCEALER WITH 2% SALICYLIC ACID pH 3.5 NO. DRI-36


Phase Product A


Water


1,3 BUTYLENE GLYCOL1 DERMOTHIX 1001


B BEANTREE1


DERMOL MOS1 DERMOL OL1


PARAPEL HC-851 C Unipure White LC 987 ADT-C2 Unipure Yellow LC 182 ADT-C2 Unipure Red LC 381 ADT-C2 Unipure Black LC 989 ADT-C2


D E F


G DERMOL CG1


Salicylic Acid USP Ethanol 200 Proof


Triethanolamine 99% Water


INCI Water Butylene Glycol Disteareth-100 IPDI Methylheptyl Isostearate


Isostearyl Neopentanoate (and) Isocetyl Stearate Oleyl Lactate


Linoleamidopropyl Ethyldimonium Ethosulfate (and) Dimethyl Lauramine Isostearate


CI77891 (and) Isopropyl Titanium Triisostearate (and)


Bis-Hydroxyethoxypropyl Dimethicone (and) PEG-2 Soyamine (and) IPDI


CI77492 (and) Isopropyl Titanium Triisostearate (and)


Bis-Hydroxyethoxypropyl Dimethicone (and) PEG-2 Soyamine (and) IPDI


CI77491 (and) Isopropyl Titanium Triisostearate (and)


Bis-Hydroxyethoxypropyl Dimethicone (and) PEG-2 Soyamine (and) IPDI


CI77499 (and) Isopropyl Titanium Triisostearate (and)


Bis-Hydroxyethoxypropyl Dimethicone (and) PEG-2 Soyamine (and) IPDI


Caprylyl Glycol Phenoxyethanol


Salicylic Acid USP SDA 40B


Triethanolamine Water


0.50 0.50


2.00 5.00


As needed for pH 3.5 qs to 100.00


Procedure: Add water and butylene glycol to main beaker. Heat to 70˚C-75˚C, then add Dermothix-100 while blending with overhead mixer. In separate beaker add phase B ingredients (Oil), heat to 70˚C. Add phase B to phase A with increased


mixing. In separate beaker, combine phase C ingredients (Pigment), slowly mix into main beaker. Cool emulsion down, at 45˚C add phase D (Preservative). In separate beaker combine ingredients phase E (Active) mix until all salicylic acid is solubilised in ethanol. Add phase E to main beaker below 35˚C. Adjust pH to 3.5 using Triethanolamine. Add water to qs to 100%.


Suppliers: 1 Alzo 2 Sensient 10 | LITTLE BOOK OF NOVEL TEXTURES 0.09 0.13 1.00


FORMULATED WITH 2% SALICYLIC ACID. LOW PH IS NOT A PROBLEM FOR DERMOTHIX AS THIS CONCEALER IS FORMULATED AT PH 3.5


%


58.00 2.00 3.00


5.00 5.00 5.00 1.00


10.00 A SMOOTH CUSHIONY CONCEALER Y AND WITHOUT


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64