Page 78
www.us-tech.com
Irvine, CA — Meggitt Sensing Systems, a Meggitt group division,
has launched the Endevco model 7298 triaxial, variable capacitance
accelerometer designed for highly accurate measurement of low-fre- quency events. Typical applications require measurement of whole-body motion in three mutually orthogonal directions immediately following a shock or in the presence of severe vibrational inputs.
September, 2013 Meggitt Intros Triaxial Accelerometer
water-resistant connector that, when combined with the optional model 3907 cable assembly, allows for extended outdoor exposure. With the lowest profile in the
industry at 14.2mm high and light weight of 22 grams, the unit has a broad standard excitation input
joy ride To Be Precise. Innovators in Wire Processing Triaxial variable capacitance accelerometer. With its exceptional bandwidth,
precision accuracy and high shock survivability, the Endevco model 7298 is suitable for use in aircraft flight and flutter testing, automotive rough road body motion studies, sus- pension system tests, railroad testing and train tilt control, centrifugal force, launch loading and accelera- tion, and short-term navigation. Available in six models, ranging
Economic and fully programmable rotary cable stripping machine with a high
Semi-automatic, multi-step stripping machine for coaxial, multi-conductor cable and single conductor wire
Intuitive color touchscreen user interface No mechanical adjustments required when changing wire sizes Very sensitive trigger sensor LED lighting Best price/performance ratio on the market
Schleuniger, Inc. | Manchester, NH | (603) 668-8117 |
www.schleuniger-na.com/cs5200_us
from 2 to 100g, the accelerometer incorporates a patented sensing ele- ment with gas damping and internal over-range stops, which enable the transducer to withstand high shock and acceleration loads. It is packaged in a stainless steel, hermetically sealed package utilizing an integral
range covering 6 to 45VDC, operates across the full military temperature range of –55 to +125°C with integral digital temperature compensation, and is easy to install with simple two-screw mounting. In addition, the unit offers +0.5
percent FSO typical non-linearity and hysteresis for most ranges and +1 percent FSO maximum for both thermal sensitivity shift and ther- mal zero shift, enabling it to provide the highest level of total accuracy available.
Contact: Meggitt Sensing
Systems, 14600 Myford Rd., Irvine, CA 92606 % 949-276-0486 Web:
www.meggitt.com or
www.meg-
gittsensingsystems.com
QC Is Top of Line at IMET
Southampton, PA — Even today’s most advanced printers, placers and reflow ovens are prone to an occa- sional error, due to a misplaced part
Perfect Soldering, Every Time! With Reduced Labor Costs!
Fancort and Japan UNIX together deliver a wide variety of contact, ultrasonic, or laser robotic soldering solutions to handle the most diffi cult soldering applications with ease and effi ciency. There is no need to struggle any longer. These systems will replace your highly skilled soldering operators with lower cost labor and consistent results-the challenge in today’s competitive marketplace.
Easy to program and set up Low consumable and maintenance costs Highest wattage heaters available Longest tip life in the market Positional accuracy to 10 micron Four desktop platforms with working area to 500mm x 500mm SCARA systems for in-line automation Fixtures designed and built by Fancort for turnkey system
or minor glitch. However, every assembly turned out by IMET is sub- ject to intense scrutiny by Quality Control Leader Glendalys Pedraza and her trusty equipment team con- sisting of Automatic Optical Inspection (AOI) and X-Ray (for BGAs) plus her omnipresent micro- scope. Once this escape-proof net identifies a defect, Glendalys rele- gates the board to rework and/or repair. Only after she conducts a sec- ond inspection and ascertains that the specified changes were made, will she pronounce the board perfect and o.k. for shipment. IMET provides a full range of
product development services, includ- ing design, electronics engineering, prototyping, PCB assembly and con- tract manufacturing. Its 15,000 sq. ft. facility in suburban Philadelphia is staffed by seven engineers and sup- port personnel who manage three automated PCB assembly lines and accompanying inspection and work stations. Industries served include medical equipment, automotive, mili- tary and aerospace, as well as con- sumer products ranging from electron- ic toys and games to multi-application
interactive devices. Contact: IMET Corp., 505
Keystone Road, Unit E,
31 Fairfi eld Place, West Caldwell, NJ 07007, ph: 973-575-0610 e-mail:
sales@fancort.com
www.fancort.com
Southampton, PA 18966 % 866-435-4907 or 267-288-5330 fax: 267-288-5493 E-mail:
imet@imetcorporation.com Web:
www.imetcorporation.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100