lock or tag other than their own, is the Authorizing Officer for the job. This person can be the Master, Chief Engineer, Chief Officer or Electrician.
- Tag should be of substantial strength and durability and include the words “Danger” and “Do not Operate”, “Do not Start”, “Do not Open” or similar.
- Locks shall be available onboard for machinery isolation according to the type of machinery particular to that vessel. - Locks may include baker locks, valve locks, cable locks, plug locks, etc.
In case more than one individual is involved with the work where equipment and/or circuits are required to be locked out, everyone shall place their own personal lock on the energy isolating devices provided the device is able to accommodate multiple locks. If this is not feasible, either person may be designated as the individual responsible for carrying out all steps of the lockout procedure. That individual will inform the work crew when it is safe to work on the equipment and/or circuits.
Gear or equipment must be tagged out of service when it becomes worn or damaged and is no longer safe or suitable for its intended use, and/or may present a hazard if used in their present condition must be tagged out of service. Portable equipment sent for repair must be securely tagged. The tag must be filled out with a complete description of the equipment problem.
The following information must be written on the tag:
- “Do Not Operate” on one side.
- “Do Not Remove This Tag” on the other side.
- Description of the problem with the item.
- Name of the vessel to which the equipment is assigned.
- Signature of individual tagging item.
- Date of tagging.
- Long Term Lockout Requirements.
In the event a repair cannot be made immediately, the Responsible Officer must ensure that the energy sources are tagged “Do Not Operate” and physically locked with appropriate devices, such as:
- Key locks. - Clamps. - Tie wraps.
- Other suitable methods and material that cannot be removed except by forcefully cutting or destroying “Do not Operate” tags must be attached to the gear and its power sources where applicable. The tags should be replaced when they become unreadable.
When the job is complete and the equipment or circuits are ready for testing or normal service, check the equipment and/or circuits to ensure that no one is exposed. Before energy is restored to the equipment after lockout, the work area shall be inspected to ensure that tools and parts have been removed, guards restored, relief valves closed, and the equipment components are operationally intact.
In situations where maintenance of equipment needs to be energized for testing, the above actions shall be taken prior to the removal of locking devices and energizing.
Equipment back to normal
After work has been completed and the equipment is ready for normal operation, the Responsible Officer should ensure that everybody is kept clear of the machinery or equipment, all tools have been removed from the work site, guards have been replaced and any operating controls have been placed in the “neutral” or “off” position. The Responsible Officer should then remove the lock-out/ tag-out devices and restore power to the machinery/system or equipment.
An effective LOTO system / procedure protects seafarers from unnecessarily exposure to hazardous energy sources during servicing, maintenance, or setting up equipment. Accidental start- up of machinery or unintended release of stored energy may lead to catastrophic risks including and cause serious physical injuries or death to seafarers, equipment damage or fire accidental ignition. Proper implementation of an effective LOTO procedure may reduce such effects.
Three Safety Tips for Locks and Tags
1. Never remove a lock or tag that is not yours.
2. Never attempt to restart, or restore energy to, a machine, circuit, or any equipment that is locked or tagged.
3. Never attempt to bypass equipment that is locked or tagged
The Report • June 2023 • Issue 104 | 113
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144
