WWEM 55 Shimadzu – WWEM Stand J5
Visit Shimadzu’s stand to discuss how to improve throughput, lower overheads, report earlier and reduce laboratory footprint with new technology. Shimadzu 24/7/365 capabilities facilitate fully automated multi-method capabilities with no human involvement.
Eliminate the need for a dedicated PFAS analyser, with Shimadzu LC and mass spectrometry technologies you can run suites of methods on a single system, including online sample prep capabilities. The global #1 LC system is combined with the fastest and most capable single quad, triple quad and high-resolution accurate mass instruments. Triple quadrupole instruments offer the lowest limits of detection with streamlined reporting for ultimate data confi dence.
High-resolution accurate mass instruments allow for targeted and non-targeted sample analysis to fi nd and identify compounds present in a sample. Ultra-fast acquisition in combination with outstanding sensitivity enables high quality data-independent acquisition (DIA) analyses to increase compound coverage on MS
and MSMS level, enable targeted, suspect screening as well as unknown analysis and facilitate retrospective data re-interrogation capabilities. For More Info, email:
58693pr@reply-direct.com email: Skalar – WWEM Stands P14 and Q13
Skalar manufacture a range of automated chemistry analysers for your water, wastewater and environmental analysis needs. The Skalar UK and Ireland team look forward to welcoming WWEM visitors to stand P14 and Q13, where Skalar staff will be more than happy to discuss all your analysis and sample handling needs.
For More Info, email: email:
Skalar’s range of automation solutions include: the SAN++ for the continuous fl ow analysis of nutrients, total nitrogen/phosphorus, complex cyanides, phenol and more; the BluVision, for the discrete analysis of nutrients and many other parameters; the Primacs for high temperature combustion automation of solids/sludges using a 100 position autosampler for carbon (including elemental carbon and IC by acidifi cation) and nitrogen (DUMAS); the Formacs for high temperature combustion of liquids for TOC/nitrogen, and the robotic SP2000 – a customisable, automated sample handling platform for sample pretreatment, and physical parameters such as pH, COND, ALK, TURB along with COD/BOD, TSS and many other applications.
For More Info, email: email:
Swan sets the standard for the measurement of many water quality parameters. At its headquarters in Switzerland, where all instruments are manufactured, every instrument goes through multiple quality inspections. An extensive wet-bench test under representative conditions with subsequent factory calibration is the fi nal step in the production process.
For More Info, email: email:
At every stage of the drinking water treatment process, Swan offers essential instruments to measure and record key water quality parameters.
From raw water intake, to purifi cation, storage and distribution: Swan’s analytical instruments provide easy operation, low maintenance and rapid plant integration. Whether required for regulatory compliance or simply for optimising treatment procedures, Swan has the right solution at each point.
Swan has recently added to its portfolio with Seres OL instruments, together providing a more comprehensive range of water quality analysers for parameters such as turbidity, disinfectants, pH, organics, metals, conductivity, dissolved oxygen, ammonium, TOC and many others.
For More Info, email: email:
For More Info, email: email:
58697pr@reply-direct.com
South West Sensor (‘SWS’), a UK based sensor developer, will provide a demo of its new on-line analyser at WWEM 2022.
Using a highly effi cient microfl uidic wet chemistry approach, the key USP is the ability to autonomously generate high- frequency, lab-quality data at comparatively low cost requiring low maintenance.
The on-line nitrite/nitrate analyser with full SCADA connectivity is available either as a turn-key solution or for OEM integration into third party sensor cabinets. Targeted applications include effl uent monitoring at wastewater treatment plants to avoid discharge penalties and advanced process control to save chemicals or aeration cost.
Teledyne ISCO – WWEM Stand I10 fl owmeter. DuraTracker®
Join Teledyne ISCO’s water and wastewater experts at booth I10 as they reveal the long- anticipated DuraTracker®
logs fl ow data with more features at a
greater value, with multiple sensor connections and mobile phone communication. It’s fl ow measurement made easy, with durable, low-cost, effi cient operation and intelligent data communication options. DuraTracker’s two-way communication works via direct USB connection using an off-the-shelf cable. Alternatively, use remote Bluetooth connectivity to avoid entering hard-to-reach areas, or where safety is a concern. An optional in-built modem is available to automatically push data and reduce site visits, thereby saving time and money.
Also on display is the LaserFlow® , the industry-leading non-contact area velocity sensor.
Certifi ed to MCERTS Class 2, it uses advanced technology in a reliable, accurate unit to measure velocity with a laser beam at single or multiple points below the water surface.
For More Info, email: email:
For More Info, email:
58701pr@reply-direct.com
SWS’s existing in-situ nitrite/nitrate probes are portable with remote connectivity, perfectly suited for environmental applications including catchment area monitoring to spot and remedy contamination early.
SWS ammonium and phosphate sensors are in development, and the company is currently looking for deployment and collaboration opportunities.
For More Info, email: email:
For More Info, email: email:
58696pr@reply-direct.com
58695pr@reply-direct.com
Sigrist-Photometer AG secures clean water – today, but also for the future generations. Sigrist turbidimeters guarantee a reliable turbidity value and therefore a proper control of a key water quality parameter. With its control units, Sigrist also guarantees fl exible, customer-oriented digital networking.
Meet the Sigrist team at WWEM on stand S5 and learn more about turbidity measurement solutions as well as the measurement of SAC 254, nitrate, and oil traces in water.
Sigrist-Photometer AG, with its roots and headquarters in Ennetbürgen in Switzerland, has been developing, manufacturing and marketing high-quality optical measuring instruments for use in the fi elds of water treatment, food industry, industrial processes as well as traffi c and environment since 1946. Since 2021, Sigrist has been present in the UK with its subsidiary Sigrist UK Ltd.
For More Info, email: email:
South West Sensor Ltd – WWEM Stand I13
For More Info, email: email:
Swan Analytical Instruments – WWEM Stands T6 and U4
58694pr@reply-direct.com
WATER, WASTEWATER & ENVIRONMENTAL MONITORING
Sigrist UK – WWEM Stand S5
REGISTER NOW AT
WWEM.UK.COM
WWEM.UK.COM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92
