AQE 41 Signal Group - AQE Stand D11


Signal Group, the UK developer and manufacturer of advanced gas analysis and calibration instrumentation, has submitted both portable and fi xed VOC analysers for MCERTS certifi cation, and the company’s stand (D11) at AQE 2022 will feature both instruments.


The 3010 MINIFID rugged, portable, heated FID VOC analyser has been designed to demonstrate compliance by hydrocarbon


emissions measurements from multiple stacks or sites. The S4 SOLAR heated FID VOC analyser is a rack-mounted instrument for continuous monitoring, offering the accuracy and reliability that Signal customers expect, but with the additional benefi ts of a detachable tablet and software for RS232 or Ethernet connectivity.


AQE visitors will also be able to see the new S4 SOLAR XPLORE portable heated FID, and anyone with an interest in QAL2 audits will be able to see the 821s Gas Divider and the NOXGEN NOx converter effi ciency tester.


Visitors will be able to see fi rst-hand, how an innovative detachable tablet makes emissions monitoring easier and safer – putting data where it matters… in your hands!


For More Info, email: email:


For More Info, email: email:


58578pr@reply-direct.com AIR QUALITY & EMISSIONS Siemens – AQE Stands N1 and O1


When monitoring stack emissions there are - apart from other specifi c components - always three core components in focus: SO2


, NOx determine the NOx


and CO. To (NOx


being the combination of NO and NO2 )


concentration in many cases NO2 is reduced to NO via a converter.


NO is then measured either by NDIR, UV or other techniques. Converters are usually simple to operate, but they require space, and the active material is consumed over time – depending on the NO2


of NO and NO2


load of the stack gas. This creates service


and material costs as well as blocking space for additional analysers. Siemens Set CEM CERT is currently being certifi ed to report NOx


to provide the sum total of both measurements as NOx


as an ULTRAMAT 23 measurement calculated in the Set CEM


CERT. By using measurements that are already present, the operation of a converter is unnecessary, and this is refl ected in a substantial reduction in OPEX.


ULTRAMAT 23 has passed the EN15267 test for certifi cation ranges of 50 mg/m³ for CO and NO, which saves costs. The ULTRAMAT 23 is a highly cost effective multi component analyser supporting applications that were not possible before.


For More Info, email: email:


Sonitus Systems - AQE Stand A10


The UK Environment Agency’s Monitoring Certifi cation Scheme has awarded MCERTS approval to Sonitus Systems, for its air quality monitor product DM30 Dustsens.


Sonitus Systems has steadily grown to be a leading global supplier of construction and industrial monitoring instrumentation. Through an expanding network of global distributors, Sonitus


Systems’ products are currently in use on over 4,000 construction, industrial and smart cities projects across the world.


Speaking about the company’s recent achievement, Managing Director Paul McDonald shared: “Our vision has always been to create better environments for people to live and work. This MCERTS certifi cation is further validation of the innovation of our team and the technical robustness of our products, which contributes to the success of Sonitus Systems globally.”


Sonitus Systems were also awarded ISO 9001:2015 certifi cation in June 2022. This additional approval gives further assurance to customers that the company and team are operating to a world class standard.


For More Info, email: email:


SUEZ – AQE Stand C8


The SUEZ Air & Climate team work with municipals, utilities and industrial companies to review their carbon net zero agendas. One way they can help is with the complete innovative air quality service, AirAdvanced®


For More Info, email: email:


, CO2 & N2


reporting of GHG emissions as well as a reliable understanding for each site’s carbon footprint. It establishes a fi rm baseline understanding via a diagnosis mapping study – measuring CH4


O concentrations. Data is integrated into an inverse dispersion model which


For More Info, email: email:


provides a detailed account for the site’s GHG footprint outlining source apportionment and emission fl uxes (Kg/hr). Measurement campaigns are versatile and designed accordingly to ensure emission fl uxes are captured correctly and as accurately as possible. Based on the detailed analysis, mitigation solutions are suggested and where agreed are implemented.


Want to know more? Chat to the SUEZ Air Quality experts to fi nd out how they can help with your Air Quality challenges – Craig Lewis and Mikael Khan will be on Stand C8 at AQE.


For More Info, email: email:


For More Info, email: 58581pr@reply-direct.com -Scan360. This provides solid data for annual 58579pr@reply-direct.com


Four years of colocation with reference instruments results in South Coast Science’s unique sensor correction algorithm and best-in- class precision.


Because no mandatory product testing exists, it is sometimes diffi cult for customers to verify claims made by manufacturers. However, the achievement of MCERTS certifi cation provides independent verifi cation that the automatic correction process works extremely well, and not only is it effective for PM but works equally well for gas sensor data, but what does MCERTS mean for customers?


For More Info, email: email:


The certifi cation process measures the performance of the device, so customers can be confi dent that data output is traceable to UK and European standards. Achieving MCERTS certifi cation provides independent verifi cation of device performance, giving assurance to customers about the data quality they can expect.


Signifi cantly, the onboard correction process means that these devices do not require the use of heated air inlets. This results in low- powered lightweight instruments (Praxis/Urban is only 4kg and Praxis/OPCube 2kg), making them very easy to handle and deploy.


For More Info, email: email:


With over 70 years of experience in the emission monitoring industry, SICK will be showcasing their automated monitoring solutions for the waste and recycling industries, from scanning material on conveyors to continuously monitoring mercury on your EFW plant, SICK can provide a solution!


For More Info, email: email:


For More Info, email: email:


58576pr@reply-direct.com 58580pr@reply-direct.com 58577pr@reply-direct.com


South Coast Science – AQE Stand F7


Sick (UK) Ltd – AQE Stands D6 and E6


AQESHOW.COM


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92