30
Analytical Instrumentation Ocean-going Lab … The Real Test of a Nutrient Analyser
The UK’s National Oceanography Centre (NOC) undertakes integrated ocean research and technology development from the coast to the deep ocean. As such, the NOC has a heavy requirement for seawater analysis. However, in addition to analytical work at the NOC’s facilities in Southampton and Liverpool, the organisation’s researchers also need to be able to analyse samples on board a variety of research vessels. Under these conditions, high levels of precision and reliability can be a challenge for most laboratory equipment, so NOC has invested in SEAL Analytical segmented fl ow analyzers (SFAs) - the AA3 and the QuAAtro.
“The QuAAtro is the workhorse of our Southampton laboratory,” says the NOC’s Dr Sinhue Torres-Valdes. “It has a compact footprint and provides automatic analysis of large numbers of samples, with only small sample volumes required. The AA3 is employed for ‘on-ship’ analysis because as a modular SFA it is easier to maintain in the event of any problems whilst away from shore.”
Wholly owned by the Natural Environment Research Council (NERC) the NOC is a leading institution for sea level science, coastal and deep ocean research and technology development, tackling the greatest environmental challenges of our age, including sea level change, the oceans’ role in climate change, predicting and simulating the behaviour of the oceans through computer modelling, and long-term monitoring technologies.
The NOC’s analysers are managed by Mark Stinchcombe who has been with the organisation for around 13 years following an MSc in Oceanography at the University of Southampton. He says: “Prior to the purchase of the SEAL equipment, we were experiencing poor reproducibility with older equipment; rough weather was affecting the baseline and we suspected that was due to the movement of a fi lament inside a light source inside one our analysers during rough seas. We therefore acquired the SEAL analysers because they are robust and unaffected by the rigours of a ship in the mid-Atlantic.”
In addition to the ability to operate both at sea and in a land based laboratory, Mark also requires three other important features in his analytical instrumentation. First, he needs the ability to analyse large numbers of samples very quickly because, whilst at sea, he can be responsible for analysing samples from a number of scientists simultaneously, and also because his land based laboratory at the NOC provides an analytical service to a broad community encompassing research scientists, students and a number of industrial clients. Secondly, with samples coming from a wide variety of different sources, including seawater, estuarine waters, pore water, phytoplankton culture and biological samples, he needs to be able to measure a broad range of concentrations. Thirdly, he requires low detection limits so that his work is not limited when measuring at low levels. SEAL SFAs are therefore ideal for Mark’s work, offering high sample throughput with low sample volume, which reduces both cost and waste.
The SEAL analysers provide low detection limits with excellent reproducibility. At fi rst they were employed to measure nitrate+nitrite, nitrite, silicate, ammonium and total dissolved nitrogen. However, the NOC also needs to be able to analyse total dissolved phosphorus, and whilst this method was not available as standard for seawater, SEAL’s technical support staff have worked with Mark and Sinhue to adapt a freshwater total phosphorous method to meet the NOC’s needs. “The development of this new method took years to refi ne, but we have been delighted with the result,” Sinhue says.
The range of projects supported by these analyzers is diverse, including for example, work to assess ocean acidifi cation and ocean biogeochemistry; including ocean productivity, nutrient biogeochemical cycles and research to understand how currents distribute nutrients in the ocean. The analysers are also employed to check the data recorded by ‘Ferryboxes’ - real-time continuous monitors mounted inside fl ow-through chambers to measure the quality of water that is pumped from a subsurface inlet as ferries travel from port to port.
SEAL Analytical’s President Stuart Smith says: “We are delighted to be involved with the work at the NOC and it is particularly pleasing that we have been able to develop a new method specifi cally to meet their needs. This is an excellent example of the way in which we are continually looking for ways to refi ne and improve instrument software and hardware, working closely with customers to ensure that they get the most out of their SEAL analysers.
For More Info, email: email:
For More Info, email: email:
chemservice.com |
info@chemservice.com | 1-800-452-9994
8527ad@reply-direct.com
“Instrument manufacturers often claim that their equipment is robust and reliable but by successfully using the AA3 both onshore and offshore, Mark has shown that ours is no idle boast. Around the world, seawater analysis is becoming a very popular application for our segmented fl ow analysers, and it is very gratifying that we are contributing to the success of the important work that is being undertaken at the NOC.”
For More Info, email: email:
Automate Your Viscosity Testing
Email
AutomateMe@cannoninstrument.com and request our viscosity brochure to learn more
For More Info, email: email:
3. 4. 5. 6.
7. 8.
9. 10.
43886pr@reply-direct.com
should do it NOW! 1. 2.
10 Reasons you
Reduce subjectivity in timing measurement
Eliminate impact of operator-to- operator variability
Decrease mathematical errors Enable unattended operation Make better use of operator skills
Shorten time spent on sample processing and testing Reduce calibration costs
Lessen consumable usage and disposal cost Improve lab safety
Increase traceability and reporting options
New High
Speed FTIR Fuel Analyser Launched
AMETEK Grabner Instruments have released a new high-speed, compact, FTIR fuel analyser for automatic and comprehensive measurement of gasoline, and jet and diesel fuels. Built on Grabner´s new Vision instrument platform, the MINISCAN IR Vision increases analysis speed by a factor of ten when compared to previous models.
For More Info, email: email:
For More Info, email: email:
About Us: Since 1938 CANNON Instrument Company® has helped generations of customers improve their viscosity measurement. Our products meet or exceed international standards specifications such as ASTM, SAE, ISO and AASHTO.
6916ad@reply-direct.com ANNUAL BUYERS GUIDE 2018 •
WWW.PETRO-ONLINE.COM
For More Info, email: email:
The MINISCAN IR Vision builds on Grabner’s more than 20 years of innovation and experience in FTIR fuel analysis. The analyser, which is confi gured to measure more than 100 different fuel components, gasoline, and jet and diesel fuel parameters, was developed specifi cally for fuel blending, quality inspection, specifi cation compliance at the point of sale. The instrument is pre-loaded at the factory with a database of several thousand fuels collected worldwide and measured in accordance with ASTM and EN fuel specifi cations.
2139 High Tech Road • State College • PA • 16803 814-353-8000 • 800-676-6232 • Fax 814-353-8007
For More Info, email: email:
43420pr@reply-direct.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100
