This page contains a Flash digital edition of a book.
BIOTECHNOLOGY 45


What is the benefit of piezo drives?


Steffen Arnold outlines the advantages piezo drives bring to laboratory automation.


L


aboratory automation is a very special field of automation engineering. It is


concerned with the automation of laboratory processes in chemistry, bio-engineering, pharmaceutical and food technology as well as medicine aiming to improve the reproducibility of the processes and save time and costs through automation.


Undoubtedly quite different from each other, the various markets have one crucial thing in common: they need fast and precise drive systems. If the application so requires, they must also be as compact as possible or operate reliably even in strong magnetic fields, at low temperatures and in a vacuum.


Piezoelectric drives, scanners and positioning systems are a safe bet here, ranging from pumping and dosing tasks through sample manipulation to fully-automatic screening.


Te precise supply of substances is one important field of laboratory automation. Te compact dimensions, high precision and dynamics of piezoelectric drives combined with their low purchasing and maintenance costs make them


Fig. 1. The precise supply of substances, e.g. by micro-diaphragm pumps, is one important field of laboratory automation. The ‘driving force’ is a disc-shaped piezoceramic.


Image: thin XXS Microtechnology AG


For this purpose, PI offers a large selection of appropriate positioning and handling systems based on different piezoelectric working principles: for example ultrasonic piezo drives are well-suited for many applications requiring high dynamics.


Working as direct drives, they dispense with the mechanical components of classic motor spindle-


www.scientistlive.com


indispensable for micropumps and nanolitre dosing. Te same applies to piezoceramic disks for generating fast oscillations as well as for actuators with strong acceleration at strokes of 10 to 1000µm, and piezomotors for fast motions in the range of several millimetres.


Micro-diaphragm pumps are a typical exemplary application of piezoceramic actuators. Tey work in a similar way to piston pumps but the medium to be transported is separated from the drive by a diaphragm. Te drive can therefore not interfere with the pumped media and vice versa. Highly dynamic, disk-shaped, piezo elements mounted directly onto a metal disk lend themselves to the miniaturised version of this type of pump. High delivery rates can thus be realised even under backpressure by varying the switching frequencies or the amplitude of the piezo displacement by means of a corresponding control.


Micro-dosing valves operate in a similar way to pumps but the forces required are higher. Te common dosing frequencies in this application are usually in the kilohertz range and can be implemented only with piezo actuators. A variety of piezo components are used in the


micro-dosing valves, depending on their size. For example, small piezo tubes are used for drop-on-demand methods, like in ink jet printers.


Miniaturised valves for dosing tasks in the nanolitre range are produced using piezo disks, for example, which are also used for lab-on-a-chip applications.


Valves requiring larger strokes can be implemented by piezo actuators with a lever system. Tey are suitable for longer travel and thus also for applications in which certain drop sizes have to be achieved as a function of the material properties.


Automation in laboratory environments is often necessary because ambient conditions restrict the accessibility, eg in vacuum, magnetic fields, radiation or because components are integrated deeply into the system. Small, precise, and reliable piezo drives are the proper solution for this task.


Typical applications include, eg, multi-leaf collimator apertures, in which small lamellae are readjusted individually by compact drives in order to predetermine a certain shape and eliminate undesired peripheral effects of the illumination and/or radiation.


Similar requirements apply to sample manipulation or alignment of optical imaging systems by miniature drives.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52