RISK, ASSET & DOCUMENT MANAGEMENT
Electrical engineer Dr Iñigo Adín, a researcher at CEIT (the Centre of Studies and Technical Research of Gipuzkoa, Spain), discusses the European TREND project on rolling stock electromagnetic compatibility.
C
urrently, rolling stock electromag- netic emissions are a major con-
cern for train manufacturers and railway infrastructure operators.1
The available
harmonised EMC standards (EN50121-2, EN50121-3-1 and EN50121-3-2) do not completely address interoperability issues caused by rolling stock interferences with signalling systems.
Moreover, these standards do not cover representative worst-case conditions de- rived by transients in rolling stock behav- iour typically generated by feeding and track circuits’ discontinuities.
On the one hand, this situation wastes time and resources for train manufacturers when integrating rolling stock and signal- ling systems. Moreover, in trains that have already been tested, problems may still occasionally arise. Therefore, neither the responsibilities nor the technical solutions are straightforward.
The duration of the field testing employed to solve these kinds of problems and to go through the certification process may vary between three and 12 months, while the cost of the complete process may be any- thing from €25,000 to €1.5m.2
On the other hand, railway infrastructure operators suffer railway infrastructure availability reductions caused by rolling stock electromagnetic incompatibility with safety critical signalling systems. These problems might cause an estimated reduc- tion of 10% of the availability on the most crowded lines.
The conclusions derived from the analysis carried out prior to this project are summa- rised in the following points: • The certification process varies enor- mously in time and cost across Europe and extra requirements are in place in some countries.
• Demonstration of permanent electro- magnetic compatibility of rolling stock in all possible conditions is not feasible with the current available standards.
• The RAILCOM project has made impor- tant research in the fields of EM emis- sions of rolling stock that affect GSM-R, track circuits and BTMs. However this is only a starting point because only some issues of the overall problem have been partially addressed.
• The research community has made sig- nificant improvements in understanding the physical phenomena that lie behind EM incompatibilities between rolling stock and other systems (track circuit, signalling and telecommunications ser- vices). Unfortunately, the research areas have been isolated and a cross-domain approach has not yet been employed.
The TREND (Test of Rolling Stock Electro- magnetic Compatibility for cross-Domain Interoperability) project will address this situation by means of the design of a test setup that enables the harmonisation of freight and passenger rolling stock approv- al tests for electromagnetic compatibil- ity, focusing not only on interference with broadcasting services but also on railway signalling systems.
TREND will also identify and design the cross acceptance test sites on electrified and non-electrified lines that reproduce repre- sentative worst case conditions for steady state and transient behaviours. These worst case conditions will be obtained thanks to the modelisation of rolling stock and the rail and feeding infrastructure.
The thorough analysis comprises measure- ment, modelisation and safety and avail- ability analysis of the effect of rolling stock electromagnetic interferences (EMI) on the neighbouring systems. The systems poten- tially affected by EMI will be completely covered. This complete physical environ- ment will permit a precise analysis of the EMI coupling model affecting the whole communication system.
Thanks to the safety and availability model of the communication systems, TREND will design a test procedure recreating rep- resentative worst-cases for rolling stock electromagnetic emissions that could affect interoperability, including transient phe- nomena.
TREND’s contract number is 285259, granted in the call SST.2011-2.5-1 - Rail system interoperability (regulatory and non-legislative interoperability based on technical innovations). The consortium is formed by seven expert organisations: • Rolling Stock – CAF and CEDEX (Spain) • Feeding and rail infrastructure – Trafikverket (Sweden)
• Broadcasting Services (which include
TV, radio, Freight RFID, WFI and GSM) – York EMC Services (UK)
• Track Circuits – Lulea University of Technology (Sweden)
• GSM-R – IFSTTAR (France) • Spot signalling systems – CEIT and CE- DEX (Spain)
This project, coordinated by CEIT, will provide the technical background and evi- dence to define a common set of standards and procedures to deal with electromag- netic compatibility between rolling stock and its environment.
This information will enable the European authorities and standardisation bodies to establish a set of new harmonised stand- ards and to revise and complete the current ones. This will cut the cost of interoperabil- ity demonstrations and increase compa- nies’ competitiveness, and improve safety.
TREND’s outcomes are specially focused on the main stakeholders in the European railway industry. It is expected to reach the level of previous successful projects such as EIRE, which set the technical specifica- tions for the interoperability of the ERT- MS/ETCS.
To ensure the involvement of the railway industry, to keep the objectives in line with the practical aims of the expected impact set by the commission, and to achieve a wider dissemination of the results obtained during the TREND project, an advisory board has been set up, comprising top-level organisations with a direct interest in the project.
The consortium will provide technical in- formation to the advisory board members and in return, they will make suggestions and comments and disseminate the infor- mation inside and outside their organisa- tions. The advisory board members are in- dependent of the consortium, guaranteeing the independence of their opinions on the quality of the research. They are: European Railway Agency, the RSSB, Network Rail, BAE Systems, IMA (Applied Magnetism Institute of Spain) and GCEM (Polytechnic University of Cataluña).
1 ERA EMC Report 2010 2 Ibid.
FOR MORE INFORMATION Visit
www.ceit.es
rail technology magazine Dec/Jan 12 | 53
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92