RESEARCH HIGHLIGHTS
Photonics Better connected
A novel link between optical fibers and nanometer-scale silicon structures could aid the development of integrated optical circuits
Silicon is a unique material that has revolutionized electronics; it enables engineers to put millions of electrical devices onto a single chip. Replacing the electrical currents in this technol- ogy with beams of light could enable even faster information processing. Qian Wang at the A*STAR Data Storage Institute and co-workers1
have now designed a crucial component for
such optical chips — a connector that links the silicon chip to an optical fiber. Such a device should enable efficient light input and output. Silicon is a promising platform for dense photonic integra-
tion because sub-micrometer-sized silicon wires, known as waveguides, are capable of tightly confining and guiding light. As the technology required for processing silicon in this way already exists, silicon nanowires are attracting attention from the electronics industry. The challenge, however, is to be able to insert and extract a beam of light efficiently into and out of such tiny structures. Wang and his team have now designed an ultra-compact lens
that can be directly integrated into the silicon chip at the end of the waveguide. Their proposed lens is based on an idea known as a graded refractive index (GRIN) lens. The common GRIN lens usually distorts a light beam as it is collimated or focused, resulting in a so-called aberration. “We now propose a computa- tional algorithm that can generate a novel graded refractive index profile for the GRIN lens and thus achieve aberration-free sub- wavelength focusing and highly efficient coupling,” says Wang. The team of researchers’ graded index structure consists of a
stack of alternating layers of two materials — for example, using silicon, which has a high refractive index, and silicon dioxide, which has a low refractive index. The layers of silicon are thicker than those of silicon dioxide at the optical axis, but this gradually reverses higher up in the stack. Simulations showed how this structure could expand out light
travelling along a 300 nanometer-thick silicon waveguide so that it couples to a fiber with a diameter of 10.4 micrometers. With appropriate anti-reflection coating, the coupling efficiency was calculated to be as high as 90%. The team of researchers also assessed the sensitivity of the optical coupling to any movement
A*STAR RESEARCH OCTOBER 2011– MARCH 2012
of the fiber, indicating that the new approach would provide a compact, efficient and robust way of achieving fiber-to-nanopho- tonic chip coupling. The next step will be to demonstrate this concept experimentally. “We plan to incorporate the idea into an electronic–photonic integration platform,” says Wang.
■
1. Wang, Q., Loh, T. H., Ng, D. K. T. & Ho, S. T. Design and analysis of optical coupling between silicon nanophotonic waveguide and standard single-mode fiber using an integrated asymmetric super-GRIN lens. IEEE Journal of Selected Topics in Quantum Electronics 17, 581–589 (2011).
79
©
iStockphoto.com/kjekol
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96