ENGINEERING & NANOTECHNOLOGY
Data storage Coupled duo
Systematic study of the switching behavior in differential dual spin valves reveals the role of interlayer couplings
Spin valves are essential building blocks in the magnetic sensors of read heads in hard disk drives. They consist of two magnetic layers separated by a non-magnetic layer and act as valves for electrons depending on the relative alignment of the mag- netization (spin) in the magnetic layers. With the continuous push to boost the storage density of disk drives, it has become increasingly important to shield each individual sensor from the magnetic flux of adjacent bits. However, the current approach of placing the read sensor between two magnetic shields limits the resolution with which information can be packed. To circumvent this issue, a read sensor using a ‘differential dual
spin valve’ (DDSV) was previously proposed by Guchang Han and co-workers at the A*STAR Data Storage Institute. Based on two spin valves separated by a gap layer, it is not influenced by uniform magnetic fields (unlike single spin valve read sensors) but on field gradients. As Han explains, the packing resolution is thereby no longer limited by the magnetic shield-to-shield spacing, but by the thickness of the two active layers in the spin valves (called free layers) and the gap layer separating them. In a significant step in understanding how the reading per-
formance of DDSVs is affected by further downscaling of the device dimensions, Han and his colleagues have now systemati- cally studied the magnetic interactions between the free layers as a function of their thicknesses as well as the gap layer material and thickness1
. “There are mainly two types of interlayer interactions between
the two free layers,” says Han. One is a magnetostatic interac- tion, which propagates along the edges of the device. The other is mediated through the gap layer by either free electrons (the so-called RKKY interaction) or magnetic poles formed at the rough interfaces between the gap and free layers (Néel coupling). While the Néel coupling is always ferromagnetic, thus
favoring parallel alignment of the magnetizations in the free layers, the RKKY interaction can be either ferro- or antiferro- magnetic, depending on the gap layer thickness and material. “From a DDSV working principle, it is desirable to have
the two free layers couple antiferromagnetically,” notes Han. For patterned DDSV samples, the researchers showed that the
76
Differential dual spin valves are promising building blocks for mag- netic read heads in hard disk drives
magnetostatic edge coupling dominates the switching behavior. In contrast, for thin-film samples, it is governed by a competi- tion between the RKKY and Néel coupling, which can be con- trolled by the appropriate choice of gap material and thickness on the nanoscale.
■
1. Han, G. C., Wang, C. C., Qiu, J. J., Luo, P. & Ko, V. Interlayer couplings in a differential dual spin valve. Applied Physics Letters 98, 192502 (2011).
A*STAR RESEARCH OCTOBER 2011– MARCH 2012
©
iStockphoto.com/greg801
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96