Page 78
www.us-
tech.com Withstand Extreme Punishment
Vista, CA — BEI Kimco Magnetics, a brand of Custom Sensors & Technologies (CST), has introduced a new, rugged brushless DC (BLDC) motor that was developed specifically to withstand the harshest conditions found in the Oil Exploration Industry. The robust design also makes it suitable for other applica- tions found in severe environments where failure is not an option.
products that have been tested and proven to last is crucial. In some cases, replacing a motor in drilling applications can take up to ten hours or more. BEI Kimco Magnetics has designed a motor that can stand up to the challenge, and has the testing results to prove it. The new 1.5-in. diameter DII15-
60-200A High Pressure High Temperature (HPHT) brushless DC motor provides the best solution for severe down- hole applications such as mud pulser valves, caliper deployment and sensor positioning. The motor has been successfully tested to operate under continuous duty in temperatures up to 205°C and pressures up to 30,000 psi. To achieve the durabil-
New brushless DC motor. As the extraction of oil reaches
greater depths, drilling equipment must continue to operate reliably in increasing temperatures and pres- sures, while also enduring extreme shock and vibration. In an industry where one hour of downtime can cost upwards of $100,000, having durable
ity of this new motor, the company took a design with nearly two decades of suc- cess in the field and pushed the performance envelope into the HPHT realm. The resulting motor uses inte- gral Hall commutation and rare earth magnets to sup- port high operating efficien-
cies and corrosion resistance. Designed to withstand shock to 1000g’s and vibration to 25g’s, the new BLDC motor is built to endure the most extreme environmental con- ditions. To fit a variety of installa- tions, the DII15-60-200A can be cus- tomized for gearbox or other feed-
back device options. In addition, winding variations are offered to meet a wide range of controller volt-
ages and currents. Contact: BEI Kimco Magnetics,
1499 Poinsettia Avenue, Suite 160, Vista, CA 92081 % 800-572-7560 or 760-597-7042 fax: 760-597-6320 E-mail:
sales@beikimco.com Web:
www.beikimco.com
Aved Integrates Battery Cell Technology
North Billerica, MA — Custom engi- neered and manufactured lithium battery packs and battery manage- ment systems for medical, industrial, military, robotics, and R&D OEMs are being introduced by Aved Elec tron - ics, Inc. The company’s battery
pack design and manufacturing specializes in the development and production of high reliabil- ity lithium-based power tech- nologies and battery manage- ment systems (BMS) for mis- sion-critical applications. Matching the appropriate
cell chemistry and topology with OEM design require- ments, the firm has relation- ships with leading cell manufac- turers and performs product valida- tion testing to simulate battery and BMS performance in-the-field. Focusing on fit and function,
Aved Battery Pack Design & Manu - facturing includes Li-Ion, Li-Poly, LFP, and primary lithium technolo- gies with cells supported by Pana - sonic and other leading manufactur-
Integrating cell and battery management.
company assures continuous supply chain management, fully integrated design and production, and complete
end-of-line quality testing. Contact: Aved Electronics, Inc.,
95 Billerica Avenue, North Billerica, MA 01862 % 800-441-2833 fax: 978- 528-5299 E-mail:
rkurth@aved.com Web:
www.aved.com
ers. Providing optimized electrical functionality, mechanical construc- tion, and battery management, the
BEI Kimco: Motor Built to
July, 2015
See PLACE-N-BONDTM
in Action! See video at
https://www.youtube.com/watch?v=L_XUVteIEyE
SMT bonding made easy, pick-and-place underfilms for bonding in reflow applica- tions. Bonding strips are supplied in tape and reel for automated SMT place- ment. Obtain corner or edge bonding of devices without dispensing or curing. Try our new version without tacky pads.
Contact: P: 847.394.5800
info@alltemated.com www.alltemated.com
Other applications:
- No-flow version for "damming" - Encapsulate parts - Flex Circuit bonding - BGA seal (from conformal coating) - Ultra-thin bond line (LGA/ QFN) - Die-cut "adhesive strips" - Chain-form packaging for ultra-high volume
PLACE-N-BOND video can
also be seen at our home page,
www.alltemated.com.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88