July, 2015
www.us-
tech.com
Mill-Max: Edge Mount Multi-Purpose Terminal
Oyster Bay, NY — Mill-Max has in- troduced a new terminal pin suitable for use in a variety of board-to-board and wire-to-board applications. It has a compliant press-fit tail, slotted head and an additional press-fit fea- ture on the barrel of the pin. These
into the slotted end of the pin; this facilitates right angle board-to- board mating such as daughter card to mother board. When used for board edge connections, the printed circuit board is slipped into the slot and soldered; this may be done be- fore or after the compliant tails are pressed into the adjoining board. The slot will accept board thick- nesses up to 0.062-in. (1.57mm). The 3622 can also be
Edge-mount slotted terminal.
characteristics combine to provide functional, versatile and reliable con- nection options. The new 3622-0-32-15-00-00-
03-0 pin is designed to be a versatile solution for some popular intercon- nect configurations. The pins can be used individually or they can be packaged in customer-specified con- nector arrangements. The solderless press-fit tail allows the pins to be staked into printed circuit board holes and then have soldering opera- tions performed on the slotted end of the pin without compromising the connection to the board. The compli- ant press-fit tail is designed to work with standard 0.040-in. (1.02mm) ±0.003-in.
(±0.0762mm) plated-
through-holes and will provide a gas- tight connection. The 3622 can be used as an edge board mount pin by fitting the board
used for wire-to-board ap- plications where a perma- nent termination of wires, for power or signal trans- mission, is required. Once the pin is pressed into the board the wire can be placed into the slot and soldered. Since there is no sol-
dering operation required to make the secure electrical connection to the board, there is no concern about compromising this connection dur- ing the soldering of wires. The slot will accept up to #16 AWG stranded wire.
The 3622 slotted, compliant
tail terminal is a versatile, robust and convenient solution for board- to-board and wire-to-board inter- connect applications. Like all Mill- Max pins, the 3622 is precision-ma- chined to the highest quality and consistency. It is available with standard 10µinch gold plating, and thicker gold plating is available on
request. Contact: Mill-Max Mfg. Corp., 190 Pine Hollow Rd., PO Box 300,
Oyster Bay, NY 11771-0300 % 516-922-6000 fax: 516-922-9253 Web:
www.mill-max.com
Nano System: Advanced Drill & Rout Technology
Milpitas, CA — Nano System, the North American distributor for Tong- tai Machine & Tool, now has available in the Milpitas headquarters a 2-sta- tion Tong tai Model SD-220DR CNC drill/ rout machine for customer eval- uation and testing. Tongtai currently
PCB applications. The Nano System facility in
CNC drilling and routing machine for PCBs.
manufactures a variety of drilling and routing machine models with air bearing drill spindle speeds of up to 300,000 RPM as well as air or ball bearing routing spindle speeds up to 80,000 RPM for the most demanding
Manchester, New Hamp shire is also currently in production of custom laser applications systems utilizing UV, CO2, green, and IR laser beam delivery systems. The technical staff at Nano System is highly experienced in integrating any laser source, con- troller, software, optics, and automatic loading/ unloading in order to meet custom laser appli- cation objectives. Consult- ing services for optimizing existing or desired new laser beam delivery sys- tems are also available. Nano Systems also pro- vides installation assis- tance, tech nical support, service, and spare parts
for Hitachi printed circuit board machines from both
of the company’s US facilities. Contact: Nano System Inc.,
446 S. Hillview Drive, Milpitas, CA 95035 % 408-935-2270 fax: 408-935-2280 Web:
www.nanosys-usa.com
Page 29
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88