TOMORROW’S FLOORING
BE ONE STEP AHEAD IN THE FLOORING INDUSTRY
TOMORROW’S FLOORING
INCOREZ 148/700 INCOREZ
Incorez, a leading global manufacturer of specialist resins and polymers, has recently launched Incorez 148/700; a new waterborne epoxy curing agent for self-levelling floors which offers an improved performance over existing market products.
Incorez 148/700 is specifically designed for formulation into high build systems that provide cost effective, highly functional floors without the need for plasticisers of solvents. These systems have good compatibility with both epoxy and polyurethane topcoats whilst providing benefits such as low shrinkage, zero VOCs, very low odour, good flow properties and a long pot life.
Despite entering an established market containing several leading products, Incorez 148/700 is able to provide an improved performance over solvent free systems as well as a lower price. Other major benefits include; fast cure and early hardness development, good mechanical properties and excellent resistance to a wide variety of commonly used chemicals and staining foodstuffs.
www.incorez.com @IncorezUK
INVISIWELD SYSTEM ITEC
2012 saw Itec pioneer the use of cold welding for its entire range of commercial-rated resilient flooring with the fantastic Itec Invisiweld system. Negating the need for power tools and easier to carry out than conventional hot welding, Invisiweld leaves an almost imperceptible join making for a finish that is clean and retains the original aesthetic of wood, tile, stone and cement style decors.
The Invisiweld system utilises a chemical bond to achieve its almost invisible join and it is not only easier, but also quicker and more cost-effective than traditional seaming methods. With Itec’s Invisiweld Pro Starter Kit containing everything installers need to begin adopting the method, Invisiweld looks set to transform resilient flooring. Jason Barrett, National Sales Manager of Itec Contract Floors, commented: “We feel the method will very often supersede hot welding as it requires less equipment, is faster, less expensive, more forgiving to slight errors and provides a far better aesthetic.”
Included within the Invisiweld Pro Starter Kit are Type A (close cut and tightly butted welds) and Type C (0.3 – 4mm gaps) tubes, a contract quality knife, blades, rollers and tape. The same tubes can be used regardless of colourway or décor, making Invisiweld suitable for use on absolutely any project.
www.itecfloors.co.uk 14
www.tomorrowsflooring.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32