FASTENER FAIR HANNOVER
K-Series joins the TR family
Once fixed, the product offers a permanent thread with a high prevailing torque and pullout resistance. K-Series nuts are manufactured in a case hardened carbon
T
steel, plated and tested to ISO898, stainless steel can be supplied to order. Sizes range from M2.5 - M16, with three different spigot lengths; the body of the product is hexagon with a serrated spigot. The K-Series nut, which will be available in time for the
Fastener Fair Hannover, joins a long list of products especially designed to be used in sheet metal applications. TR Fastenings offers a wide range of sheet metal products, including; the genuine Hank rivet bush, Hank self-clinch fasteners, weld nuts, blind rivets, rivet nuts and weld nuts.
Small in size – big in use
PREBENA Wilfried Bornemann GmbH & Co KG has expanded its PKT-technology by presenting the pneumatic Mobilo.
the pneumatic Mobilo can be attached to the belt promptly and without any problems. Changing the cartridges can also be done without having to take off the HD-Controller. The pneumatic cartridge KT-3500 can be refilled by
T
using the compressor PKT-FILMMASTER 350. The standard equipment includes a HD-controller up to 142psi, with the High Pressure equipment including a HD-controller up to 333psi. Both versions will be delivered in a metal transport case and include a refillable air-cylinder KT-3500, a leather belt and a spiral coiled hose. “Operating the pneumatic Mobilo offers absolute
independence. This device is applicable everywhere, at all times and is not subject to weather conditions, temperature, time or place. It works environmentally friendly being silent and odorless.”
114 Fastener + Fixing Magazine • Issue 74 March 2012
he pneumatic Mobilo guarantees an ideal supply for all pneumatic tools using a pressure up to 333psi. Having an easy ‘click-system’
Hall: 21 Stand: A41
TR Fastenings is to introduce the new K-Series nut, the first nut which can be used for sheet steel and plastic applications too thin to be tapped by conventional methods.
he K-Series nut has been specially designed for use in applications with a minimum sheet thickness of 1mm. The nut, which offers a permanent female thread, can be installed without the need for specialist tooling.
TOBSTEEL a specialist partner
T Hall: 21 Stand: G20 Hall: 21 Stand: G14
TOBSTEEL GmbH is a wholesale company who is a specialist partner for procuring and stocking stainless steel fasteners.
OBSTEEL says that it is looking forward to Fastener Fair Hannover as it will provide it with the ideal opportunity to come into personal contact with the industry´s customers and other business partners. TOBSTEEL highlights that it is a specialist partner for
standard, special and drawing parts, TX-six lobe screws, fasteners for special profiles/profile solutions, special procurements and highly corrosion resistant fasteners.
Toggle clamps for all industries
F
Hall: 21 Stand: H77
Fikssan Fikstür Sanayi ve Ticaret A.S. has 37 years experience in both design and production of toggle clamps and fixtures.
ikssan Fikstür has achieved quality system certifications of ISO:9001, ISO:16949 & CE marking, with its manual and pneumatic toggle clamps being used in both the automotive and aerospace industries.
MKT approved
MKT is German anchor manufacturer, specialising in heavy duty steel anchors and chemical anchors, who currently holds 18 European Technical Approvals for cracked and non-cracked concrete.
M
Hall: 21 Stand: G26
KT’s wide product range, anchor design software (available in 10 languages), and technical support, enables everyone to find the anchor for an application. MKT products are tested and approved
in Germany as well as many other countries. In each case a safety factor as per ETAG 001 (European Technical Approval Guideline) is applied to the load values published. In addition to the quality controls according to DIN EN ISO 9001,
ETAG 001 requires initial and routine factory inspections by the institute which conducted the anchor test programme.
www.mkt.de
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180