EXECUTIVE HIRE SHOW REVIEW continued
GenQuip’s static attraction
New products on the GenQuip stand included the Groundhog SW6100 Fusion+ static welfare unit, which was displayed with a roof mounted solar panel to trickle charge the onboard batteries. This is designed to enable the water supply, heating and lighting to be run off a 12V system without the
need of the engine driven battery charger. Hot water is supplied by a dedicated heater, again meaning that the generator is not required to run. The unit at the Show incorporated the new Hoglift 2 system, designed to enable preparations prior to lifting to be undertaken while the user remains at low level, and which is now fitted flush with the cabin walls. GenQuip also reports that all its mobile Groundhog cabins are now VCA type A and B approved to comply with the latest European regulations.
01639 823484
www.genquip.co.uk
Russon’s two-man scissor
The simple Power Scissor from Russon Access
Platforms has now been produced as a two-man unit. The new 210kg capacity Power Scissor 400, with a maximum working height of 4m, joins the established 120kg capacity models 500 and 600, offering maximum working heights of 5 and 6m respectively. The castor mounted unit is only 736mm wide when its four stabiliser legs are folded in, and can be pushed through a single doorway. It weighs 260kg and has a 600mm by 1260mm platform area. Rather than utilising batteries, electrics or hydraulic pumps, platform elevation is achieved by either manually turning a screw mechanism, or using an electric drill with a special adapter.
01384 444630 Evolution from NC Engineering
Like last year, NC Engineering chose the Show to introduce its latest site dumper, in the form of the new HT1.0 Evolution model. Developed specifically for cost conscious hirers, this value engineered 1 tonne payload, high tip articulated machine has a simpler seat and a less sophisticated dashboard. The dumper has a 23.4hp Kubota diesel engine, a Rexroth hydrostatic transmission and Poclain wheel motors. Maximum skip discharge height is 1575mm. Lee Morris of NC Engineering also told EHN that, “To help the hire industry we have reduced our prices and we will hold them for the whole of 2012.”
028 3887 1970
www.nc-engineering.com
...FOR WHATEVER YOUWANT TO PUMP
Submersibles • Centrifugals • Sump pumps • Trash pumps Hand pumps • Pressure washers • Hoses and couplings
SUPPLIERS OF PUMPS TO THE HIRE TRADE SINCE 1976 Tel: 0800 0924423
Fax: 01622 355019 36
www.obartpumps.co.uk
sales@obartpumps.co.uk
NEXT DAY DELIVERY!
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52