This page contains a Flash digital edition of a book.
1 2 3

4 5

6 7 8

9

10 11

NECKLACE Cut a 2” length of 24 gauge gunmetal wire and make a wrapped loop. String a 4x4.5mm lavender freshwater pearl and make a wrapped loop. Repeat 19 more times. Join ten of the pearl links together with 3.5x5mm antiqued brass cable chain links, beginning and ending with a cable chain link. Repeat. Attach a pearl link chain from step 2 with a 4.75mm jumpring to the ring of a 9x21mm antiqued brass spiral clasp. Attach the opposite end of the chain with a 4.75mm jumpring to the top opening of a 12x23mm antiqued brass lyrical filigree. Connect a 20 link length of cable chain to the inside bottom right of the lyrical filigree with a 4.75mm jumpring. Attach the opposite end of the chain with a 4.75mm jumpring to the top left of a 28x33mm antiqued brass crest filigree as shown. Using a 23 link length of cable chain, connect a 4.75mm jumpring to the outside bottom left of the lyrical filigree. Attach the opposite end of the chain with a 4.75mm jumpring to the left of the crest filigree below the connection in step 4. Repeat step 4 to join the pearl linked chain. Repeat step 5 to mirror the festoon chain attachments. Attach a baroque crystal drop with a 4.75mm jumpring to the left and right of the crest filigree as shown. Insert a heart pendant into the crevice of the Etruscan connector. Fold over so that the two connector rings meet. Secure the left and right sides of the Etruscan connector’s heart curves to lock the heart drop in place. String a headpin through the heart drop and through the back of the Etruscan connector. Create a wrapped loop and fold over to secure the heart pendant. Attach three cable chain links to the left and right of the Etruscan connector’s heart curves. Join the ends of these two links with a 4.75mm jumpring. Attach the Etruscan connector by joining the 4.75mm with a cable link to the left and right of the crest filigree’s center. Attach four cable chain links through both rings of the Etruscan connector. To ensure the captured heart stays in place, attach a baroque drop with a 4.75mm jumpring through the chain link into the crest filigree.

61 Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132
Produced with Yudu - www.yudu.com