1 2
3 4 5 6
7 8
9
10 11
12
NECKLACE Cut a 3” length of 24 gauge gunmetal wire and make a wrapped loop. String a 7.5mm antiqued brass ornate bead cap, a 10x15mm Czech rose luster fire-polished bicone, and another bead cap. Repeat five more times. Cut a 3” length of 24 gauge gunmetal wire and make a wrapped loop. String a 3x4mm Czech rose luster fire- polished rondelle, a 3mm antiqued gold daisy spacer, a 6mm Swarovski golden shadow crystal round, a daisy spacer, and a rondelle. Repeat seven more times. Flatten a 16mm antiqued brass filigree bead cap and center a coin pearl. Wrap the bead cap around the pearl being careful to leave the pearl’s hole centered between two folds. Repeat four more times. Cut a 3” length of 24 gauge wire and create a wrapped loop. String a 3x4mm Czech rose luster fire-polished rondelle, a daisy spacer, the wrapped coin pearl from step 4, a daisy spacer, and a rondelle. Repeat three more times. Cut a length of 26 gauge wire and connect the remaining wrapped coin pearl to the center of a garden trellis filigree. Tuck the wire ends between the pearl and the filigree. String a headpin with a 4mm Swarovski golden shadow crystal round and make a wrapped loop. Repeat five more times. String a headpin with a 3x4mm Czech rose luster fire-polished rondelle and make a wrapped loop. Connect the rondelle from step 6 to the filigree pending using a 4.75mm jumpring as shown. Separate two 5-link lengths of 3.5x5mm antiqued brass cable chain. Connect the two lengths of chain together with a 4.75mm jumpring. Connect one end of the chain and a crystal dangle from step 6 to the lower left of the filigree using a 4.75mm jumpring. Repeat, connecting the other end of the chain and a crystal dangle to the lower right side of the filigree. Connect a crystal dangle to the second and fourth cable chain links added in step 8. Connect a link from step 1 to the 4.75mm jumpring that joins the two 5-link lengths of cable chain. Using a 4.75mm jumpring, connect a baroque drop to the end of the link as shown. Connect links created in steps 1, 2, and 3 together with 3-link cable chain sections between each in the pattern shown, mirroring both sides of the necklace. Connect the ends of the chain with the link from step 1 to the upper right and upper left side of the trellis filigree. String a headpin with a 3x4mm Czech rose luster fire-polished rondelle, a 6x30mm antiqued brass engraved bar, and a 3mm antiqued gold daisy spacer and make a wrapped loop. Connect the engraved bar and a 22mm antiqued brass hammered ring to the ends of the necklace using 4.75mm jumprings.
53
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132