ADVERTORIAL
WHEN IS HOT TOO HOT?
Geo Therm’s Tony Dale
discusses the use of thermal imaging to mitigate yacht outages and fire
occurs. Dead in the water is a cliché that is thankfully underused, much thanks to the pool of talent of the engineering crew and shore based support within our industry, servicing equipment to exacting standards.
E
As set forth in the various flag administration Safety
Codes, Class certificates and
insurance prerequisites that are all designed to bring about compliance and safe maritime operation.
Compliance measures are applicable to the size of the yacht, with safety and maintenance at their forefront. One modern maintenance technique mentioned in yacht inspection and maritime advisory notifications is the endorsement for thermal imaging cameras.
To capture a moment in time albeit a heat image (thermogram) is certainly worth more than a thousand words to the yacht owner. A thermal camera can, when used properly, identify electrically generated hotspots in a quick and timely manner, rapidly steering crew to perform corrective maintenance, that if left unnoticed, create excessive heat likely to cause an outage or worse an electrical fire.
When overheating occurs within an electrical system, it can be a sign of loose, over- tightened, corroded connections, undersized conductors, or another failure mode due to high resistance.
lectricity is one utility that we all take for granted, and immediately miss whenever an outage or blackout
Your checklist for periodic yacht based thermal inspections: •
• •
• • • •
Electrical switchboards, including the emergency board Distribution boards
Auxiliary equipment, motors, bearings, and starter panels Transformers Cable raceways
UPS and Li-ion battery systems Shore power connections
Most electrical faults tend to occur at the weakest points in an energised system. When a component is failing, a run-away effect can occur, causing the temperature to dramatically rise. It is Ohm’s law (P=I2R) that describes this relationship, between current, electrical resistance, and the power or heat energy generated.
Abnormal heating associated with high resistance or excessive current flow is the main cause of many problems in yacht electrical systems. Yacht electrical repairs should be prioritised by safety first, i.e., equipment conditions that pose a safety risk followed by criticality of the equipment and the extent of the temperature rise. So when is hot too hot!? NETA (InterNational Electrical Testing Association) guidelines dictate immediate action when the difference in temperature between similar electrical components under similar loads exceeds 15 °C (27 °F) or when the difference in temperature between an electrical component and the ambient air temperatures exceeds 40°C (72 °F). Tests are best performed at 40% load to be effective.
Safety is also paramount whenever an electrical inspection is performed. The removal of secondary dead-front guards is necessary to achieve a direct line of sight, yet no contact is necessary as the thermal camera passively detects the radiant heat from the components. Component temperatures exceeding thresholds are a cause for concern, directing the chief to engage secondary systems before significant thermal damage occurs. Moreover, prompting part replacement orders and preventative maintenance scheduling.
Damage caused by overheating is usually irreversible; the only way forward
is to
replace the component part - a challenging task if no spares are carried onboard. Disruption is likely, with failure rates exacerbated by the age of the yacht plus inspection and maintenance histories. Typically, third party thermographic surveys are performed on an annual basis by an independent Class registered inspection company - providing the impartiality insurers and yacht management companies seek, and of course, complemented with periodic thermal scans by the yacht engineering crew trained in the technique.
Remember, energised electrical components can become hot enough to melt, causing outages and fire, so plan your independent thermal survey before your next voyage - it could be the best thing you do today.
For more details visit
www.geothermltd.co.uk
ONBOARD | SUMMER 2023 | 53
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176
