Test & measurement
NEW PROCESS TREBLES SAUSAGE SKIN PRODUCTIVITY
trebles output. The process relies on precise monitoring of temperature and humidity with Vaisala sensors, combined with multi-stage feedback control.
A
ADVANTAGES OF COLLAGEN SKINS
The manufacture of collagen sausage skins from animal hide is a good example of sustainable production because it effectively recycles a potential waste product into a valuable commodity that helps to improve the quality and consistency of sausages. However, all sausage casings are delicate and require precise conditions and careful handling during manufacture, storage and distribution, and throughout the subsequent sausage manufacturing process.
Natural casings from the small intestine of meat animals tend to be variable in length, diameter and thickness, so they are not ideal for high-speed sausage manufacturing processes. In contrast, collagen casings offer reliable, consistent features, and are therefore ideal for fast, efficient processes. Also, collagen casings do not need to be stored in chilled conditions and have a longer shelf-life than traditional casings.
Collagen casings are ready to use straight out of the package, horn loading is quick and easy, and there is no requirement for soaking and untangling of bundles. There are no seasonal variations, and sausages manufactured in collagen casings offer improved cooking coverage which delivers a superior cooked appearance in comparison with sausages in natural casings.
DEVELOPING A NEW COLLAGEN MANUFACTURING PROCESS Initially, the sausage skin manufacturer utilised a conveyorised flat sheet collagen dryer, but this incurred a level of friction that could
lead to ripping and product wastage. The process was slow and wasteful, so the engineers were challenged to develop a new, less damaging technique for drying and processing the extruded cylindrical collagen cases that are used in sausage manufacture.
Sausage casings have very specific physical characteristics and need to be extremely consistent in their properties, so it was vital that the new process minimises friction whilst providing optimal levels of temperature and humidity. If humidity is too high or too low, it can negatively impact the quality of the finished product, so it was important for the equipment to be able to respond to ambient conditions, irrespective of their geographical location. The new processing solution allows the casings to be inflated with hot, dehumidified process air provided by a silica-based desiccant rotor. New equipment was also developed for transporting the inflated gel using an innovative handling system. The new system employs three precision sensors. A Vaisala HMT120 humidity transmitter monitors environmental humidity, so that dry air can be recirculated when outside conditions are too humid. In addition, two Vaisala DMT345 dewpoint transmitters monitor process air to ensure that the collagen products are maintained in ideal conditions by a multi-stage feedback control system. The HMT120 transmitter contains Vaisala’s HUMICAP technology; a thin-film polymer- based capacitive humidity sensor, which delivers accuracy, reliability, long-term stability and insensitivity to condensation or contamination. The DMT 345 dewpoint transmitters incorporate the Vaisala DRYCAP sensor, which is also designed for accuracy, reliability and stability. The sensor is condensation-resistant and is immune to contamination, however, DRYCAP’s unrivalled performance is based on
70
its capacitive thin-film polymer sensor and an autocalibration function. The sensor also has a rapid response time and quick recovery after getting wet. Vaisala’s Juhani Lehto says: “This engineering team routinely utilises Vaisala sensors because their food processing equipment is supplied to customers all over the world, operating in a wide variety of environmental conditions. They therefore need sensors that are more than just accurate and reliable in the long-term; they also need to have a low maintenance requirement.”
SUMMARY
In addition to the manufacture of collagen sausage casings, the precise measurement and control of process temperature and humidity is fundamentally important in a wide range of food and beverage processes. By minimising friction between the equipment and the casings, the new processing system resulted in less wastage, time-savings and a three-fold increase in productivity.
Vaisala
vaisala.com
team of UK process engineers has developed a technique for manufacturing collagen sausage casings which protects product quality and
September 2023 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
