INSPIRATION
09
If possible, try to line up the gap at the centre of the face at the bottom of the veiling.
10
Line up the diamonds at the back of the ball and hold the veil in place with pins.
11
Cut off the overlap behind the pins. You will end up with one overlapping row of diamonds.
12
At both ends, you need to include an extra diamond of the next row to get a smooth transition.
13
Pin the overlapping diamonds exactly on top of each other together.
14
If necessary, snip off any untidy bits but be careful not to cut in the diamonds as they will unravel.
15
Put a tiny bit of UHU on the diamonds to keep them in place before you sew them together.
16
The glue also keeps the diamonds from unravelling. Wait a few seconds before you paste the diamonds together, just until the glue gets a bit tacky. Do not squeeze but tap the parts together, to avoid the glue showing.
17
Trim off any double lines (from the next row, see step 12) at both ends before you sew the diamonds together.
72 | the hat magazine #92
Leave pins in on both sides of the glued row when you are sewing the diamonds together.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
