Expanded magnetic solutions


attract interest


Following its acquisition by Bunting, MagDev is exhibiting an expanded range of magnets, magnet assemblies, soft magnetics, and magnetising solutions. Magnetic technology plays


a key role in a wide range of green technology, including wind turbines and electric vehicles. The company offers the selection of the magnet material, design of a magnet assembly and the method of magnetisation for optimum magnetic performance. Applications are in automotive, aerospace and electronics industries, including household appliances and sensors. The manufacturer of custom and industrial magnets specialises in supplying permanent magnets, magnetic assemblies and soft magnetics. Magnets can be in a wide range of shapes, sizes and grades, with magnetic properties tuned to specific applications. With strategic partners, the company supplies sendust, MPP and iron powder cores for chokes; carbonyl iron cores for high frequency applications; strip wound cores in silicon steel and nickel alloys and iron and cobalt base amorphous and nanocrystalline cores. There is also an extensive range of magnets including neodymium, ferrite, samarium cobalt and Alnico in various shapes (e.g. rings, blocks) and sizes.


Visit MagDev at stand E190


Energy saving solutions and a turnkey installation service of renewable energy and low carbon technologies are offered by Noble Green Energy. The company delivers a range of key low carbon technologies nationwide for high energy usage clients across a variety of sectors, including manufacturing, automotive, chemical, food/ drink, printing and agriculture. Technologies include solar


PV, battery storage, combined heat and power (CHP), biomass,


Programmable screwdriver consolidates assembly tools


Do you have a variable assembly process using torque controlled electric screwdrivers? Or do you assemble by hand? If so, the Delvo current controlled screwdriver can consolidate the number of drivers in use or simply automate the process and increase productivity. Available from Nitto Kohki Europe, the programmable screwdriver boasts 30 channels, each of which can be set to suit a specific fastening operation. It has a torque range of 0.6 to 4.5Nm and can be used manually or on robotic automated systems via a simple cable connection. The screwdriver comes in both lever and push to start options, is ESD- compliant and has a seven- colour LED indication at its base for fastening verification and channel identification. There are nine programmable speed levels, automatic three-step speed control, screw count function and the fastening time can be selected. A free software package makes programming and torque verification quick and simple, with all the


Identify low carbon technologies


heat pumps, LED lighting as well as asset finance and PPAs, monitoring and maintenance. Working closely with commercial clients to fully understand on- site operations, their energy usage and any sustainability and environmental targets, enables the company to identify the correct solutions and technologies for that specific building or site.


Visit Noble Green Energy at stand F120


Enclosure system is tool-free


Design and volume manufacture of fabricated plastic enclosures is coupled with a full evaluation, sourcing and manufacturing service by Ortumex Systems. A committed, experienced team is ready to take on the task of designing, developing and manufacturing a customer’s enclosure. Its flexible approach aims to meet customers’ needs in the current fast paced, challenging market. The company says a tool-


free enclosure system offers design control, cost benefits and fast time to market for a competitive edge.


Visit Ortumex Systems at stand C50


Specialist manufacturer of high purity stainless steel manifolds and control systems, Orbital Fabrications will showcase its latest developments and innovations in TIG welding techniques for fabricating complex assemblies in stainless and high nickel content alloys. The company uses automated orbital welding techniques alongside


Keep track of expanding springs catalogue


Stock and custom springs offered by Lee Spring include compression springs, torsion springs, constant force springs, die springs, belleville spring washers, wave springs, extension springs, battery springs and numerous speciality springs. Materials include steel, stainless steel, cobalt / nickel alloy, bronze, brass, music wire and composite plastics. The experienced staff of engineers can provide expert collaboration throughout the design and manufacturing cycle and prototype and concurrent engineering assistance is provided. The company’s ever-expanding catalogue of over 25,000 stock


items are available for immediate delivery. Springs can be developed with one of the company’s engineers in one part of the world produced close to where they are needed to reduce long-run production costs. Certified to ISO 9001:2015, the company is qualified by customers in exacting manufacturing sectors including aerospace, medical, robotics, semiconductor, and electronics. It is experienced working with stringent quality requirements such as AMS Spec, Mil-Specs and QS9000.


Visit Lee Spring at stand D245


Marine bearings make a splash


data stored for quality assurance purposes.


Visit Nitto Kohki Europe at stand M65


Designed for demanding applications such as rudder bearings and water-lubricated stern tube bearings, the Orkot TLM marine bearings will be showcased by O Rings. Approvals include the latest options for greaseless operation, such as rudder carrier bearing. The company can assist in selecting the best bearing material for rudders, stern shafts, stabilisers, mooring systems and deck machinery. Orkot marine bearings won the contract from Rolls Royce for the supply of water-lubricated bracket bearings for the Type 45 destroyer fleet designed and built for the British Royal Navy by BAE Systems. The company is an authorised


distributor for Trelleborg Sealing Solutions, offering a broad range of sealing solutions for fluid power components. Products range from the versatile elastomer O-Ring to complex multi-faceted PTFE-based and polyurethane geometries. The range includes hydraulic seals, pneumatic seals, shaft seals, oil seals and other rotary seals, mechanical face seals / heavy duty seals, aircraft seals and a broad variety of static seals.


Visit O Rings at stand M245


TIG welding takes centre stage


lathe and turntable TIG welding and has recently invested to expand its in-house CNC machine shop, giving greater control and management of the entire fabrication process. Products are for use in the semiconductor, pharmaceutical, chemical and process industries. Members of the team will be available to discuss the latest innovations and support services on offer from comprehensive in-house design services, through to test and qualification processes including


in-house helium mass spectrometry for leak detection, alongside high pressure testing capabilities up to 400 bar. For high purity applications, all fabrication, assembly and test are conducted within Class 5 and Class 6 cleanroom facilities. There will also be examples highlighting innovations in welding techniques and fabrication of fluid handling solutions.


Visit Orbital Fabrications at stand E165


Software delivers simulation on the fly


Engineers can rapidly run simulation scenarios for stress, fluids, and thermal analysis using Ansys Discovery. The software, presented by Origin Engineering Solutions, runs a computer’s GPU (graphics card) allowing simulation on the fly without the delay. Designers can therefore simulate products whilst they are designing them to save time, understand their products better and can even be used as a sales tool to demonstrate benefits visually. The SpaceClaim engine


allows rapid modification of geometry based on simulation results. The company will also be showcasing Ansys SpaceClaim, a direct modeler which allows the user to import/export any file type and modify geometry. It can be used for quick concept design, designing jigs / fixtures, reverse engineering, sheet metal and preparing files for 3D printing. Visitors to the stand will be entered into a


competition to win a Fitbit watch and Amazon vouchers.


Visit Origin Engineering Solutions at


stand C205


WWW.INDUSTRYSOUTH.CO.UK


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20