Page 48
www.us -
tech.com
March, 2024 R&S Presents New Isotropic Antenna
COLUMBIA, MD —Rohde & Schwarz has pre- sented its new R&S TSEMF-B2E isotropic an- tenna for the TS-EMF measurement system. This new antenna covers the frequency range from 700 MHz to 8 GHz and allows simple and precise evaluation of emissions on site — even for new radio services. When combined with Rohde & Schwarz spectrum analyzers, the R&S TS-EMF measurement system detects high-frequency electromagnetic fields (EMF). When combined with handheld spec-
trum analyzers, the isotropic antennas of the R&S TS-EMF measurement system support frequency selective measurement of RF emis- sions. This tried and tested measurement method simplifies EMCE measurements
since the isotropic antenna directly measures all directions and polarizations. Isotropic antennas have only had to cover a frequency range of up to 6 GHz for standard
radio services up to now. The new radio servic- es such as Wi-Fi 6E and new 5G bands such as n96, n102, and n104, mean that frequency ranges up to 7.125 GHz have to be covered. The new R&S TSEMF-B2E antenna for the TS-EMF measurement system has a frequen- cy range of 700 MHz to 8 GHz and can now simply measure this range isotropically. With the R&S FPH or R&S FSH hand-
TSEMF-B2E isotropic antenna.
held spectrum analyzers, three antennas in the R&S TS-EMF measurement system now cover the entire frequency range from 9 kHz to 8 GHz. The EMF measurement option for these analyzers provides an automated test sequence on site followed by subsequent re- port creation. These reports help ensure that transmitter systems comply with the applicable limits and furnish proof of conformity for third-par- ties.
Higher frequencies up to 44
GHz can still be measured with a handheld analyzer and hand- held directional antennas such as the R&S HE800-PA to sup-
port stirring. Contact: Rohde & Schwarz
USA, Inc., 6821 Benjamin Franklin Drive, Columbia, MD 21046 % 503-523-7951 E-mail: dominique.loberg@
rsa.rohde-schwarz.com Web:
www.rohde-schwarz.com
METCASE Intros
Aluminum
MAS-i4 Selective Soldering Machine from Sasinno USAi
hi f Most awarded soldering equipment in history!
The MAS-i4 is the latest generation selective soldering machine with the highest flexibility and output. The system features an XY servo table for two independent fluxer nozzles (fluxer 1 and fluxer 2). The distance between the fluxers is automatically adjusted by servo motors, as programmed by the software.
Customers can choose to use only one fluxer for all boards so it can accommodate two flux types in one machine, or they can choose to use two fluxers with the same flux. For preheat- ing, the MAS-i4 is equipped with a top convection preheating zone and bottom IR preheating zone. The top preheating zone
2022 Circuits Assembly NPI Winner
2022 EM Innovation Award Winner
2021 Global Technology Award Winner
2021 Mexico Technology Award Winner
2021 Mexico Technology Award Winner
2021 Mexico Technology Award Winner
Contact:
Mike Young SASInno Americas
Mike@SASInnoAmericas.com 513-317-1466
Sasinno USA offers US-based Sales & Service. e Soldering
Enclosures BRIDGEVILLE, PA — MET- CASE has launched elegant new TECHNOMET-CONTROL alu- minum enclosures for electronic control systems, panel PCs and HMI electronics. They are specif- ically designed for mounting on standard VESA brackets/arms, walls, machines and round poles. TECHNOMET-CONTROL
is ideal for indoor applications such as industrial machine con- trol, factory processing, security systems, test and measurement, point-of-sale, IIoT and detection equipment. It is suitable specifi- cally for Siemens TP displays (sizes KTP400 to TP1200) but can also house touchscreens and displays by other manufacturers, including Beckhoff and B&R. Diecast front and rear bezels
fit flush with the main case body. Snap-on trims hide all the assem- bly screws. The front panel is re- cessed in the bezel to protect dis- plays and membrane keypads. At the rear VESA MIS-D 100 mount- ing points are provided for fitting an off-the-shelf VESA control arm
or wall bracket. Contact: OKW Enclosures,
Inc., 3000 Old Pond Road,
Bridgeville, PA 15017 % 412-220-9244 E-mail:
seanb@okwenclosures.com Web:
www.okwenclosures.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
