March, 2024
CLEVELAND, OH — The Smart Sonic Model 6000 is the “work- horse” of the Smart Sonic line of ultrasonic stencil and pallet cleaners. It will clean 29” x 29” (73.7 x 73.7 cm) stencils in less than four minutes. In addition, it will clean
wave solder pallets, oven radia- tors, misprinted PCBs and asso- ciated tooling used in the SMT printing process. The Model 6000 was developed for cleaning effi- ciency, while providing operator safety. This unit is fully auto- matic and programmable. The operator simply places
the stencil in the carrier basket located in the home position at the front of the unit and selects the desired pre-programmed cleaning profile from the touch-
Motorized Linear Blade Depanelizer from FKN
MILLIS, MA — Separating skip scored V-Scored PCB panels up to 48 in. (1.2m) long is made sim- ple and easy with the K4000 PCB depanelizer from FKN Sys- tek. Just place the bottom score- line of the PCB onto the linear blade and step on a guarded foot switch to bring the circular blade across the top scoreline for clean separation of the PCB panels. Right and left blade guards
assure operator safety. The front and back support and take up table are height adjustable. The K4000 L18 and K4000 L24 are available with optional light beam safety curtain across the front of the blades for additional operator safety, as well as an op- tional ESD-safe belt conveyor to
www.us -
tech.com
screen controller. The basket raises up, indexes and is lowered into the wash tank. Total time for cleaning solder
paste is typically one to two min- utes. Once the wash cycle is com- plete the transport lifts the basket from the wash tank and indexes to the rinse tank where low pressure water is automatically sprayed (approximately 10 seconds). Upon completion of the rinse
cycle, the stencil basket is trans- ported back to the home position where it can either air dry or a low pressure air gun can be added
Model 6000 ultrasonic stencil and pallet cleaner.
to expedite drying. The pre-pro- grammed cleaning programs pro-
Page 29 Smart Sonic Intros “Workhorse” Ultrasonic Stencil Cleaner
vide flexibility for use in multiple cleaning applications. Like all Smart Sonic stencil and pallet cleaners, the Model 6000 is com- patible with Smart Sonic’s exclu- sive EnviroGuard 100% closed- loop technology as well as the company’s SE-1 and EZ-0 evapo- rators, and 440-R SMT detergent, which is the only VOC-free stencil
cleaning chemistry. Contact: Smart Sonic Corp.,
837 E. 79 Street, Cleveland, OH 44103 % 818-610-7900 E-mail:
smt@smartsonic.com Web:
www.smartsonic.com
K4000 PCB depanelizer.
bring singulated PCBs to the side for easy removal. An infrared sensor on the end
of the conveyor will stop the belt for PCBs with components on them. Scrap pieces will pass un- derneath the sensor beam into a discard bin. FKN Systek depanel- izers are made in the U.S. Blades are made of long lasting tool steel and can be resharpened several times.
Contact: FKN Systek, 115
Pleasant Street, Millis, MA 02054 % 508-376-2500 E-mail:
fkn@fknsystek.com Web:
www.fknsystek.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
