Jan/Feb 2025 Continued from previous page
we’ve encountered and it’s a testament to the reliability and performance of the technolo- gy,” Jim says. “The primary benefits for us are faster program development times.” In response to the evolving demands of surface mount technology (SMT) designs, the Takaya 1400 F-SL series stands out with its cutting-edge capabilities. As SMT designs increasingly populate both sides of a printed circuit board (PCB), traditional test targets have shrunk to minimal dimensions, as small as 2-3 mils. The 1400F-SL system addresses this challenge with exceptional resolution and accuracy, enabling fine-pitch test targets down to 5 mils on center. In addi- tion, its advanced design accom- modates larger boards — up to 24 x 25 in. (61 x 64 cm) — and fea- tures an increased head clear- ance of approximately 2.5 in. (6.4 cm), improving access to complex assemblies. A faster setup pro- cess also eliminates the impact of PCB thickness on camera-to- probe offset, enhancing overall test precision.
Flying probe systems have also surpassed traditional meth- ods in terms of speed. “The newer Takaya systems are faster and easier to program, allowing us to
Ironwood Launches ATE Test Contactor
EAGAN, MN — Ironwood Electronics has introduced its new Raptor line of ATE (automatic test equipment) test contactors. Configured as quickly replaceable cartridges, a first for ATE applica- tions, the cartridges utilize Ironwood’s proprietary lamina- tion technology for increased pre- cision, enhanced convenience, and increased Mean Time Between Assist (MTBA). PicoRaptor high-performance
rigid contact pins provide both high bandwidth and high inser- tion count. A single P elastomer is utilized for consistent contact force between the load board and the DUT, while still allowing for a slight wiping action. When com- bined with the proprietary Advanced Contact Finish (ACF), a stable Cres is achieved with mini- mal solder migration and pro- longed load board life. Designed for efficiency, Ironwood’s cartridge approach reduces the overall cost of test — simply remove the align- ment plate to replace the car- tridge while leaving the frame in place, and resume testing. Contact: Ironwood
Electronics, 1335 Eagandale Court, Eagan, MN 55121 952-229-8200 E-mail:
info@ironwoodelectronics.com Web:
www.ironwoodelectronics.com
www.us-tech.com
meet the demands of high-volume production while maintaining quality,” Jim adds. “For
Page 55 How Takaya Flying Probes Fuel Microboard’s Success
example, we’ve processed over 100,000 boards for a single medical customer in the past year. By dedicating specific machines to different board types, we’ve optimized throughput and ensured consistent results.” As Jim concludes, “Flying probe testing
has been instrumental in our success, enabling us to meet customer demands with precision and efficiency. It’s a technology that continues to prove its value, and we’re proud to have been early adopters.” Contact: TEXMAC, Inc., 2225 Martin
Takaya flying probe systems.
Making Ovens Smarter
Ave. #K, Santa Clara, CA 95050 408-970-8500 E-mail:
rmckenzie@texmacusa.com Web:
www.texmac.com/takaya
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92
