Page 42


www.us-tech.com


and JTAG for High-Volume Production


AUSTIN, TX — Goepel Electron- ic’s integration packages offer a powerful combination of hard- ware and software for seamless integration in Automatic Test Equipment (ATE). JTAG/Bound- ary-Scan integration increases test coverage, improves diagnos-


cantly reduce cycle times while increasing test coverage and to ensure maximum efficiency of the test process. To meet the high demands


Goepel now supports the SPEA 3030 board tester.


tics, and enhances process opti- mization and failure analysis. The latest integration of em-


bedded JTAG solutions for the SPEA 3030 DualCore in-circuit tester (ICT) is aimed specifically at high-volume manufacturing test and supports parallel pro- cessing of multiple units under test (UUT). The goal is to signifi-


of panel testing, the SPEA 3030 DualCore system is equipped with two fully independent ICT cores that can execute test se- quences in parallel. A SCAN- FLEX® II BLADE 8 RMx1-A/B/C with up to 8 TAPs and TIC mod- ules from GÖPEL electronic are integrated into each ITC core, re- sulting in a maximum of 16 TAPs in the overall system. This allows the user to process up to 16 PCBA in parallel. In addition to the standard JTAG port, SWD, SBW, BDM, and PIC are also supported, so that even non- JTAG components can be tested


or programmed. Contact: Goepel Electronics, 4030 W Braker Lane, Suite 310,


Austin, TX 78759 % 512-782-2500 E-mail: h.ehrenberg@goepelusa.com Web: www.goepelusa.com


Goepel Combines ICT


Jan/Feb 2025 INSPECTIS Launches


Digital Camera Microscope SOLNA, SWEDEN — INSPEC- TIS AB announces the launch of its Series U50 digital camera mi- croscope, a 4K system boasting 60 FPS for applications where ultra-high resolution is needed for fast-moving inspection or live working tasks. Back in 2018 Inspectis intro- duced the Series U10, the world’s


dynamic range than previous 4K cameras. Additionally, it pro- vides superior image stabiliza- tion. Compatible with the full range of Inspectis accessories and Inspectis software, The new U50 is expected to become a pop- ular choice when ultra-high reso- lution is needed for fast-moving inspection or live working tasks.


Series U50 digital camera microscope.


first 4K resolution digital micro- scope. Soon afterward, the more powerful U30 series joined the lineup. But now, with the intro- duction of the Inspectis U50 Se- ries, a new era begins. U50 brings all the best expected from the U30 and bumps up the frame rate to the widely anticipated 60 FPS, and at the same time, boosts the zoom range from 30x to 50x. The U50’s sensor provides higher sensitivity and a higher


Inspectis AB is a pioneer of


advanced optical inspection solu- tions. INSPECTIS offers plug and play, reliable and cost-effective digital camera microscopes de- signed for demanding non-contact


optical inspection and assembly. Contact: Inspectis AB, Torshamnsgatan 35, SE-164 40


Kista, Sweden % +46-760-092515 E-mail: alistair@inspect-is.com Web: www.inspect-is.com


Flux Pastes for Soldering Nickel and Brass from Emil Otto


ELTVILLE, GERMANY — THT (Through-Hole Technology)-based electronic assemblies with nickel or brass pins can be used in vari- ous applications and environ- ments. This applies in particular to areas with demanding environ- mental conditions, where the elec- trical and mechanical properties of the pin materials play a deci- sive role. As these pins are diffi- cult to wet, they pose a challenge in the soldering process. Components with nickel or


brass pins are difficult to solder, where even long wetting times or high temperatures often do not lead to success. Furthermore, the PCB and the components in the immediate area can be damaged. This applies to both wave solder- ing and reworking. THT components with nickel


DL Technology has been the leader in micro dispensing technology for over 15 years. For more 


www.dltechnology.com 216 River Street, Haverhill, MA 01832 • P: 978.374.6451 • F: 978.372.4889 • sales@dltechnology.com


and brass pins are frequently used in durable electronic devices, with pins made of brass offering a high mechanical strength. Maxi- mum reliability is required, espe- cially in demanding environmen- tal conditions. High resistance to corrosion and abrasion is particu- larly important in such applica- tion scenarios, as electronic com-


ponents have to withstand ex- treme conditions. Nickel is the preferred material due to its pro- tective properties. To meet the requirements, a


flux must have good soldering properties. In addition, it should not affect the wave or selective soldering process. Instead, it must be possible to solder reli- ably with the specified parame- ters. Consequently, there are a variety of requirements for a product if it is only intended to support the soldering of a certain type of pin. At the same time, there are aids that are less obvi- ous in their application than their effect would suggest. For example, immersing the pins in solder based on a carboxylic acid complex not only removes the oxide layer, but also protects the pins from further contamination and surface changes. This allows immediate further processing or storage.


Contact: Emil Otto Flux- u.


Oberflächentechnik GmbH, Eltviller Landstrasse 22, Eltville, Germany % +49-6123- 7046-0 E-mail: info@emilotto.de Web: www.emilotto.de


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92