54
Magnets for the Aerospace Industry on Show at Airtec 2017
At Airtec 2017 in Munich, the newly AS9100c certified Goudsmit Magnetics Group (Stand A1-G93) will present a range of magnetic product solutions for the aerospace industry. The company designs, manufactures and supplies magnet systems and permanent magnets that are lower in weight than their predecessors and continue to perform optimally over the long term in the toughest conditions. Such magnet systems can be found in actuators, linear drives and electric motors, including those intended for the aerospace industry. Special software is also used to simulate and test whether the critical requirements for tensile forces, torques, field strength, temperature and sensor specifications are met. Weight reduction – which is always desirable for the aerospace industry – is made possible through the use of alternative magnet types with higher efficiency.
Having recently attained AS9100 certification, the company is now a qualified supplier to the aerospace/aviation industry. Since attaining ISO/TS 16949:2009 certification in 2008, Goudsmit has been a supplier to the automotive industry. Attaining the AS9100 certification was the next step. In addition to the aerospace and automotive industries, magnets are indispensable in the medical, greentech and oil & gas industries. The family business established in 1959 particularly distinguishes itself in the areas of magnetic measurements, quality control and product development.
The company supplies the basic principles, data and knowledge for the design process of magnet assemblies. The company’s embedded knowledge of the physical and mechanical properties of magnetic materials is employed from the earliest stages of design and is also called upon to suggest effective, lighter and cost-effective alternatives. This is achieved in part through the use of analytical methods for describing magnetic circuits, calculation methods for determining the required dimensions of permanent magnet circuits and two- or three-dimensional finite elements processes. The development of a completely new product that is to be delivered fully assembled and according to specifications is also among the possibilities.
43562pr@reply-direct.com
New CIP System Feature Offers ‘Sterilising on the Move’
Suncombe, one of the world’s leading Cleaning In Place (CIP), bio-waste decontamination and hygienic process engineers, has announce the launch of a sterilising version of its well-established MobileCIP™ portable CIP System.
Primarily for use in the BioPharma sector, the new range is called the MobileCIP/SIP™ and has been developed in close co-ordination with major biopharma clients, which requested the ability to carry out Sterilise in Place (SIP) directly after Cleaning in Place.
As well as encompassing sector standard methodologies for validatable SIP, the new range incorporates an advanced control system, built to GAMP guidelines with 21CFR part11 compliance,
offering audit trails and user access controls by passwords. With a standard SIP setting of 121.11°C for 30 minutes, the versatile control system allows configuration of F0 (Steam Sterilization Lethality) sterilising parameters.
Designed to comply with ASME BPE (Bioprocessing Equipment) – the international standard for the design and construction of equipment intended for use in the manufacturing of biopharmaceuticals – they include compliance with the ‘ 2D deadleg’ rule, an area of entrapment in a vessel or piping run that could lead to contamination of the product. The system also offers full drainability, full traceability and is completely validatable
Steve Overton, Suncombe’s Technical Director, comments, “Our MobileCIP™ systems are very successful and are already widely in use around the world. Initially developed to be a versatile CIP system, with options and custom designs for client specific requirements, the MobileCIP/SIP™ versions now offer an even more flexible solution without any loss of performance or reporting.”
They are available with the full range of CIPSuite™ control systems, both Siemens and Allen Bradley based, from the basic #1000 to SCADA based #4000, incorporating 1 to 100 individually configurable recipes with options for 21CFR11 compliant records.
Without taking up permanent floor space and avoiding pipework installation, all MobileCIP™ units are ready to use, plug-in solutions for many cleaning requirements. Easily moved to different operating or storage locations, operational parameters for recipes (times, temperatures, flow rates, detergent strength) can be stored for both existing and future equipment.
Helping to minimise validation and qualification, the new MobileCIP/SIP™ systems include a full validation package including risk assessment, design, manufacture, testing and qualification protocols. Fully certified, the cGMP designed systems comply with all legislative and safety standards. Available in standard or bespoke versions, they are incorporate GAMP, ASME BPE, FDA and ATEX guidelines.
43138pr@reply-direct.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128
