90
MANUFACTURING TECHNOLOGY
Tecno Impianti draws new business at Stuttgart
Tecno Impianti Srl, based in Valgreghentino (LC), Italy, designs and supplies wire drawing machinery for the fastener industry,
and can provide solutions for drawing wire both off-line and in-line with cold heading machines.
Tecno Impianti, have very low operating costs.
Tecno Impianti recently exhibited at Fastener Fair Stuttgart for the
very fi rst time and reported having a very successful show.
“In addition to the numerous visits to our stand by old customers
and potential new ones, we sold one power-driven uncoiler of
our AP series and an in-line wire drawing machine of our newly
designed SKP series, to two very important
European fastener manufacturers.”
The Model
Tecno Impianti explains that the strongly-built horizontal wire AP/30 power-
drawing bullblocks of the MO/P series are utilised for large scale driven uncoiler
production of cold heading wire and are available in four different sizes, uncoils and
with capstan diameters of 700mm, 800mm, 900mm and 1,000mm. straightens wire
These bullblocks are supplied complete with uncoiling and pre- of maximum
straightening devices, wire pointing systems and take-up units. The diameter
drawn wire can be taken-up on fi xed wire carriers or into the form 30mm, in-line
of loose coils. In this case, with the help of a coil extractor and a with a cold
compacting unit, the coils can eventually be compacted and bound. heading machine. The feed
The SKP series in-line wire drawing machines are used for rolls and the straightening
calibrating wire in-line with cold heading machines or chain making rolls are controlled hydraulically
machinery. For some applications fastener manufacturers prefer and the coil-holding arm is designed to sustain coils weighing up to
to calibrate wire directly in-line with the production machine, in 2,700kgs.
order to improve the metal formability, and better control the wire In contrast, the Model SKP/8-2P wire drawing machine will be
diameter and surface. Tooling life is also improved as the wire enters used for a special application, in line with a cold heading machine
directly into the cold header immediately after being drawn. In some but a two-pass reduction of the wire diameter. The maximum input
cases it is possible to reduce wire inventory by drawing several wire wire diameter (low carbon) is 5.5mm. The machine is equipped with
sizes from a single wire rod size, purchased in greater volume. SKP a variable-speed drive and has die-boxes designed for drawing with
series machines are synchronised with the cold header and, says oil lubricant.
IN-LINE WIRE DRAWING
FOR YOUR IN-LINE
MACHINES
For calibrating
AND OFF-LINE
wire from 2,0
to 35,0 m,
in-line with
WIRE DRAWING
cold headers
and machines
for chains.
NEEDS
HORIZONTAL WIRE
DRAWING BULLBLOCKS
Tel. +39 0341.604801 • Fax +39 0341.604289
www.tecnoimpianti-italy.com • info@tecnoimpianti-italy.com
For coil-to-coil wire drawing
of cold heading wire from
5,0 to 32,0 mm.
Our lines are supplied
complete with uncoilers,
wire pointers, take-up
units, coil compactors.
Hall 15
Stand G12
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140