Mohammad Shamsuzzoha, Laurentiu Nastac, The University of Alabama, Tuscaloosa, AL; David Weiss, Eck Industries Inc., Manitowoc, WI; John Berry, Mississippi State University, Starkville, MS
Effect of Inclusions on the Tensile Properties Inside a LPPM A356 Casting (15-002)
Franco Chiesa, David Levasseur, Guy Morin, Centre de métallurgie du Québec, Trois-Rivières, QC, Canada; Bernard Duchesne, Collège de Trois- Rivières, Trois-Rivières, QC, Canada
Molding Methods & Materials
Quantitative Method for Determining the Level of Cure and Wall Tickness in & Materi- als Shell Sand Systems (15-090)
Hemant Bohra, Sam Ramrattan, Western Michi- gan University, Kalamazoo, MI
Use of Sintered Bauxite in Molding Applica- tions (15-075)
Scott Giese, University of Northern Iowa, Cedar Falls, IA
Steel
A New Approach to the Casting of Steels and Ni-Base Alloys (15-012) John Campbell, Campbell Technology, Ledbury, UK
1:30 p.m. Aluminum
Influence of Metallurgical Parameters on the Impact Toughness of Near Eutectic Al-Si Al- loys (15-067)
Ossama Elsebaie, Fawzy Samuel, Université du Québec à Chicoutimi, Chicoutimi, QC, Canada; Saleh Alkahtani, Salman bin Abdulaziz Univer- sity, Alkharj, Saudi Arabia; Herbert Doty, General Motors, Pontiac, MI
Ultrasonic Degassing of Aluminum Foundry Alloys (15-032)
Victor Rundquist, Kiran Manchiraju, Southwire Co., Carrollton, GA; David Weiss, Eck Industries Inc., Manitowoc, WI
Influence of Nano-Structured Silanols on the Mi- crostructure and Mechanical Properties of A4047 and A359 Aluminum Casting Alloys (15-080)
Andre Lee, Yang Lu, Michigan State University, East Lansing, MI; Tsung-Yu Pan, Allen Roche, Vinci Technology Corporation, Ypsilanti, MI
Cast Iron
Comparing Late Inoculation Methods and Materials (15-005)
Ralph Showman, Mark Beers, ASK Chemicals, Dublin, OH
Increasing the Inoculant Potency of Commer- cial Inoculating Alloys in Induction Melted Gray Cast Iron (15-016)
Iulian Riposan, Ion Stefan, Mihail Firican, Stelian Stan, Politehnica University of Bucharest, Bucharest, Romania; Rodney Naro, David Wil- liams, ASI International Ltd., Cleveland, OH
Effect of Chromium and Molybdenum Ad- dition and Inoculation Treatments on High- Strength Gray Cast Iron Solidification and Shrinkage Defects (15-043)
Luciana Stuewe, Magma Engineering of Brasil, São Paulo, Brazil; Ricardo Fuoco, Metso Minerals, Sorocaba, Brazil; Wilson Luiz Guesser, UDESC - Santa Catarina University, Joinville, Brazil; Andre Paulo Tschiptschin, USP - São Paulo University, São Paulo, Brazil
Engineering
PANEL: Energy Treasure Hunt Best Practices (15-098)
Chris Leuteritz, Patriot Foundry & Castings, Franklin, NH; James Wiczer, Sensor Synergy Inc., Vernon Hills, IL; Michael Stowe, Ad- vanced Energy, Raleigh, NC; Steve O’Neill, EnerNOC, Frisco, TX; Robert Baird, GM, Warren, MI; Brian Reinke, TDI Consulting Inc., Lemont, IL
60 | MODERN CASTING March 2015
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92