IBERITAL 2.11.- RESET THE CONTROL UNIT MACHINE WITH DISPLAY (not available on all models)
In machines with display models, the control unit can be reset to the initial factory parameters. To do this turn the main switch of the machine (position 0) and simultaneously press buttons 1 short coff ee, 1 long coff ee and continued.
Keep it pressed and move the main switch of the machine in position 1 or 2, is indistinct. Hold it for several seconds until visulaizar onscreen display PRESET RESET COMPLETE message.
Turn the main switch of the machine in position 0 and drop
pulsadores.Al turn the machine we will reset the unit to factory control unit parameters.
NOTE: Perform this action means losing any customization done on the machine, both in the technical menu and the user menu. Accountants, visualizations, dosages, date / time and settings, climate control, ...
If your machine does not regulate the temperature by temperature sensor, but does so through the action of a pressure switch, the display will appear in the following error:
T.ProbeUnconnect
This situation is due to an incorrect selection on the heating menu. In order to eliminate this alarm, follow the steps indicated in paragraph 2.10, section “C” (INTERRUPTED TEMPERATURE SENSOR), acting like a replacement unit in question.
INSTALLATION AND OPERATION MANUAL
ENGLISH
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62
