IBERITAL - The fi rst option which appears is:
Language xxxxxx
Where you can select the language (English, French, German, Spanish) via the UP/DOWN buttons. Once the desired language has been selected, press the MENU button and move on to the following option:
Temp/time vis. ENABLED/DISABLED
The display will give you the option of showing the rest position of the machine, the TIME and the TEMPERATURE on the top line of the display.
Using the UP/DOWN buttons, select ‘ENABLED’ or ‘DISABLED’ from this option. - If ‘ENABLED’ is selected, press the MENU button to move on to the following option:
Name 2 xxxxxx
On the display, Name 2 (the bottom line on the display) will appear, with the cursor situated in position 1 (of the 16 characters on the line). With the UP/DOWN buttons, select the letter or number required (BLANK SPACE! “ # $ % &...).
Pressing OK confi rms the character and the cursor advances to the following character. Continue this process until all the characters on the line are completed. Once this procedure is completed, press the MENU button to move on to the following option:
Line rotation 2 ENABLED/DISABLED
On the display the name on Line 2 will either move about or remain static; with the UP/DOWN buttons, select ‘ENABLED’ or ‘DISABLED’ and press the MENU button to move on to the following option:
- If ‘DISABLED‘ is selected, press the MENU button to move on to the following option:
Name 1 xxxxxx
The name appearing on Line 1 (upper) of the display can be programmed, with the cursor in position 1 (of the 16 characters on each line) and using the +/- keys to select the diff erent letter or number (BLANK SPACE! “ # $ % &...). On fi nding the desired character, press the OK button to confi rm and move on to the following character. Continue the process until all the characters are done.
Once this procedure is completed, press the MENU button to move on to the following option:
Line rotation 1 ENABLED/DISABLED
On the display the name on Line 1 will either move about or remain static; with the UP/DOWN buttons, select ‘ENABLED‘ or ‘DISABLED‘ and press the MENU button to move on to the following option:
Name 2 xxxxxx
The name appearing on Line 2 (lower) of the display can be programmed, with the cursor in position 1 (of the 16 characters on each line) and using the +/- keys to select the diff erent letter or number (BLANK SPACE! “ # $ % &...). On fi nding the desired character, press the OK button to confi rm and move on to the following character. Continue the process until all the characters are done.
INSTALLATION AND OPERATION MANUAL
ENGLISH
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62
