IBERITAL
- Do not pull the power supply cable to unplug the machine from the socket. - Do not allow the machine to be exposed to the elements (rain, ice, sand, etc.).
- Do not expose the machine to temperatures of below 0ºC without having previously emptied the contents of the boiler and the pipes. If the water in the interior freezes, disconnect the machine from the water supply and let the water in the boiler and pipes melt.
- Do not expose the machine as a whole to temperatures above 70ºC. - Do not allow the machine to be manipulated by children or untrained persons, or any person who has not read this manual.
- Do not remove the machine side panels in order to reset the high-limit thermostat. Only offi cial technicians authorized by the manufacturer may remove the side panels and reset the thermostat.
6) Before carrying out maintenance operations, you must ensure that the machine is disconnected from the power grid via the switch on the power distribution system.
7) For cleaning operations, follow the instructions contained in this manual. 8) In the case of anomalies or irregular operation, disconnect the machine prior to carrying out any maintenance work. Contact the technical personnel authorized by the manufacturer. Repairs to the machine will be carried out by the manufacturer or an authorized after-sales service centre, using only original spare parts. If these conditions are not met, the machine will pose a danger. The connection to the power supply must be made via a switch which meets local safety standards.
9) The electrical supply cable for the machine must be connected to a switch with a minimum separation between contacts of 3 mm. This switch must be covered by an omnipolar circuit breaker.
10) In order to keep the power supply cable from overheating, ensure that it is totally extended.
11) The mains water pressure to which the coff ee machine must be connected must be between 0.6 MPa and 0.8 MPa.
12) The machine is only suitable for installation in places where its use and maintenance are restricted to qualifi ed personnel.
13) The machine must be installed in a horizontal position, and must NEVER be submerged in water or any other liquid.
14) The power supply cable must not be repaired or replaced by the user. Should the cable become damaged, disconnect the machine from the power supply and contact qualifi ed technical personnel authorized by the manufacturer.
15) Disconnect the machine from the power supply when it is not going to be used for an extended period of time.
16) The average level of surface sound pressure is 71dB ± 7dB and the average sound power is 86dB ± 9 dB.
INSTALLATION AND OPERATION MANUAL
ENGLISH
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62
