search.noResults

search.searching

note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
IBERITAL In order to eliminate this alarm:


Press the MENU button until the following appears (even if the message ‘Probe Unconnect’) appears, do not stop pressing MENU):


Language xxxxxx


Press the MENU button repeatedly to go through various options until you see the following on the display: Mixed tea


with pump / without pump


The value shown on the display must be ‘without pump’; if necessary, change the value by pressing the UP/DOWN buttons.


Confi rm by pressing OK. Continue pressing the MENU button repeatedly until you can see on the display:


Pressure Switch


Heating Type xxxxxxx


Xxxxxxx On/Off PID


The value shown on the display must be ‘Pressure Switch’; if necessary, change the value by pressing the UP/ DOWN buttons.


Confi rm by pressing OK. Press the MENU button various times until the display shows the ‘OFF’ message. Press the ‘I/O’ or ‘Non-Stop’ button, based on the machine model, in order to turn on the machine.


ATTENTION: It is absolutely necessary that the values of the parameters ‘MIXED TEA’ and ‘HEATING TYPE’ are ‘without pump’ and ‘Pressure Switch’, respectively, for machines with a display and boiler temperature controlled by pressure switch.


D. LACK OF IMPULSES FROM THE FLOW METER


When the fl ow meter is not dosing correctly or the necessary impulses do not arrive for longer than 5 continuous seconds, the used dose selection LED will fl ash and the display will indicate the fl ow meter and the group.


Alarm Flow meter GR x


To eliminate this alarm, check the fl ow meters; this alarm signal is produced due to a bypass of the signal from the meter cover, or due to a poor connection, or lastly due to and internal problem with the control unit.


It can also be caused by an unusually long feed time due to the water not fl owing at an adequate speed during dispensing.


E. CHANGE/REPLACE water fi lter When the number of litres of water set in the TECHNICAL MENU is exceeded, the display will show:


ChangeWaterFilt. xxxxxxx


With the number of litres of water previously selected to set off the alarm. To eliminate this alarm, press the GROUP 1 ‘2 coff ees’ and ‘2 espressos’ buttons at the same time on (on the left).





INSTALLATION AND OPERATION MANUAL


ENGLISH


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62