IBERITAL
2.3.4. Programming hot water (only available on New Iberital and Iberital Expression Two models)
Enter programming mode, pressing the ‘non-stop’ button for 5 seconds on the group 1 button pad (left); the ‘non- stop’ LED will light up.
- If the option ‘NO’ MIXED TEA is selected on the visual display or for machines without visual display:
• Press the hot water button. At that moment hot water will begin to come from the boiler. • •
When the desired dose has been obtained, press the hot water button again. The hot water setting has been programmed.
- If the option MIXED TEA is selected on the visual display or for machines without visual display:
• Press the hot water button. At that moment mixed water (hot/cold) will begin to come from the boiler.
• Press the hot water button. At that moment hot water will begin to come from the boiler.
• When the desired dose has been obtained (fi rst press + second press), press the hot water button again.
• The fi nal hot water setting has been programmed.
NOTE (versions with visual display and miscellaneous solenoid valve): At the same time there is a manual regulator found on the side of the water mixing solenoid valve.
2.4.- HOT WATER DISPENSER
Place the cup or any other recipient under the hot water dispenser (8). Turn the hot water knob (18) in order to begin dispensing water and turn it back again to stop it, or press the hot water dosage button if your machine features one.
2.5.- STEAM DISPENSER
a) Twist the steam dispenser (9) towards the tray (15). b) Open the steam tap (7), and in order to remove condensation let the steam fl ow out until no water droplets accompany it.
c) Position the steam dispenser (9) inside the liquid recipient you wish to heat. Turn the knob (7) to release the steam. In order to obtain a frothy cappuccino, keep the mouth of the steam ejector close to the surface of the milk. This will create an abundance of foam/froth. d) When the liquid has reached the desired temperature, close the steam tap.
e) Move the recipient containing the liquid, removing the steam dispenser (9) and aiming it at the tray (15).
f) Open the steam tap (7) for a moment, in order to remove residue stuck to the steam dispenser (9). Clean the steam dispenser (9) with a damp cloth or sponge.
2.6.- DAILY CLEANING OPERATIONS 2.6.1. Cleaning the fi lters and fi lter holders
Rinse the fi lters and fi lter holders in hot water. Leave them in hot water overnight in order to dissolve the grease left by the coff ee.
INSTALLATION AND OPERATION MANUAL
ENGLISH
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62
