ENVIRONMENTAL LABORATORY 7
New Ethos in microwave digestion enables a new level of performance
The Ethos UP with the new Maxi-24 HP high throughput rotor, from Milestone was designed to process increased volumes of sample types and weights within a single rotor-based platform. That means you can focus on what counts: increased throughput, high-quality data and more profitable runs.
The new Maxi-24 HP lets you get more done in less time with advanced capabilities that include easyTEMP contactless temperature control in all vessels, plus 300+ built-in methods with recommended sample mass and acid chemistry. With Maxi-24 HP, your lab can process large volumes of challenging sample types and weights within a single rotor-based platform and built-in easyTEMP automatically controls the temperature even in case of exothermic reactions.
With double the pressure limits and greater capacity than other high throughput rotors, the Maxi-24 HP can process as many as 24 samples simultaneously, and can complete digestion of up to two times the sample mass in less than an hour. Day after day, Maxi-24 HP delivers the kind of consistent results and throughput that high-volume labs demand; the key to greater processing efficiency and more profitable runs.
Maxi-24 HP was designed for convenience, too. Quick-assembly vessels can be closed with a simple hand-tightening, reducing handling and adding to your lab’s daily productivity.
The easy
For More Info, email: email:
For More Info, email: email:
50946pr@reply-direct.com
dosing pump for aggressive and corrosive liquids
Ebro, an Xylem brand, provides an orchestra of Measuring, Monitoring and Validation Solutions
EBI 12 / EBI 11 Wireless Data Loggers – Beyond Data Logging for the Highly-Regulated Market Segments
A wireless data logger system that has real-time radio-mode features, the Ebro EBI 11 and EBI 12 data loggers are most suitable for key Thermal Processes in Food, Pharmaceutical and Medical Applications. Whether they are for Validation Procedures or Routine Monitoring in
Dosing very aggressive and corrosive liquids in laboratories is a challenge. Diaphragm pumps are the ideal tool for this difficult task.
The new SIMDOS® 02 FT (PTFE) from KNF has
been especially developed for the transfer of aggressive chemicals. To do this, the SIMDOS® 02 FT is fitted with a PTFE head, a PTFE-covered diaphragm, and chemically resistant FFKM Kalrez® valves. An optionally available Chemraz®
-valve
kit even allows using the pump with highly concentrated acids such as nitric, sulphuric and hydrochloric acids and solvents such as TFH, DMF, DMSO and MEK. The pump head is situated outside the splash-protected IP-65 housing, providing a very significant safety feature.
Also available with heads in PP or PVDF, the new SIMDOS®
02 FT dosing pump transfers liquids with a flow rate of 30 µl to 20 ml/min, and dose volumes of 30 µl up to 999 ml. Following calibration, repeatability is +/-1% (full range) and the pump offers excellent long-term stability and consistent reliability throughout entire processes. The SIMDOS®
02 FT is safe to run dry and is self-
priming up to 2 m. It is effective against pressures of up to 6 bar and transfers viscous media up to 150 centistokes. The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. Thanks to its neat design and small footprint, the new SIMDOS®
02 FT dosing pump takes up very
little valuable laboratory space. SIMDOS®
02 FT highlights include: FT head / FFKM
valves for aggressive and corrosive liquids; intuitive operation; fast and simple calibration; pause function without data loss; adjustable transfer parameters; splash-protected design for increased safety; minimal footprint.
More information online:
ilmt.co/PL/2gB2 For More Info, email:
email: For More Info, email: email:
49339pr@reply-direct.com
Sterilisation Cycles and other processes that requires compliance to regulatory provisions and conforms to global norms and standards.
The
Winlog.validationTM and
Winlog.ProTM Software Packages, both
compliant to FDA 21 CFR Part 11, allows the users to automatically generate important and relevant reports such as Statistics Reports, Validation Reports and Calibration/Verification reports.
Furthermore, Thermal Process indicators as represented by lethality values are automatically calculated, the most common being the Fo/Po-values, Ao, Eo and Co-values.
EBI 25 Continuous Wireless Monitoring and Recording System – Measurements All in Your Grasp
With worldwide access to multi-parametric measurements and data, the Ebro EBI 25 and the Winlog.WebTM
System further
provides your operations a continuous and wireless monitoring with automatic report generation and documentation of your results.
With flexible and wide alarm management where users can configure and predefine acceptance criteria or conditions, alarm notifications can be via email or by visual and audible alarms. All measuring points/loggers can be presented according to their locations in a photo image or in a floor-plan view.
Learn more about EBI12
ilmt.co/PL/Z329 and EBI25
ilmt.co/PL/QD2X
For More Info, email: email:
For More Info, email:
51093pr@reply-direct.com
WWW.ENVIROTECH-ONLINE.COM AET ANNUAL BUYERS’ GUIDE 2020
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
