WATER / WASTEWATER 15


New range of probes for aqualculture industry Aquaread Asia will be releasing a new series of Aquaprobes for the aquaculture industry.


The AQUAMARINE-MULTI kit provides measurements for pH, ORP, dissolved oxygen, conductivity (salinity), temperature and allows further expansion for measurement sensors like depth, chlorophyll, blue-green algae, turbidity and etc.


The multiparameter probes are designed to be fl exible, they can easily be attached to handheld meters to perform fi eld measurements, while also allowing you to use it with Aquareads blackbox for continuous process measurement.


The AQUAMARINE-DS probe provides measurement for dissolved oxygen, conductivity (salinity) and temperature, where salinity and temperature changes are automatically compensated to achieve accurate readings, especially in saline water conditions.


With their rugged construction use of Marine Grade Aluminium, the probe is able to withstand the demanding conditions of marine and fresh water aquaculture applications. The simplicity of use allows operators of all backgrounds to easily manage their water quality data using our probes. From fi sh and shrimp farming, to hatchery applications, proper monitoring of water quality parameters ensures optimise water conditions, thus reducing fatalities and increasing your yields.


More information online: ilmt.co/PL/V13d For More Info, email:


Measurement and documentation


of water quality simplifi ed Systronik’s new CAPBs®


device kit can be used to check water quality, assess water supply installations and check heating systems for corrosion damage. The WQ 10 sensor module makes it possible to determine temperature, electrical conductivity, permissible overall hardness (sum total of alkaline earth metals) of fi lling water and the requisite heating water pH setting. This makes it possible to test, safeguard and document the quality of the water on site at any time in order to prevent damage caused by corrosion and limescale during set-up, operation and maintenance. The TDS value (sum total of dissolved substances in water) and the salt content can factored in to the measurements. Thanks to the automatic temperature compensation and measuring range changeover, the sensor offers a high degree of measuring accuracy.


email: For More Info, email: email:


The measurement data is transmitted to the EuroSoft® live app on smartphones or tablets using Bluetooth and displayed


in real time. PDF measuring reports together with the date and time can be produced directly from the measurements. These can be stored on iOS and Android terminal devices and transmitted. Additional information such as the customer name or even your own signature can also be added to the measurements. This provides maximum protection in the event of damage.


More information online: ilmt.co/PL/kRXj For More Info, email:


New data loggers detect water losses early


email: For More Info, email: email:


Leaks in water pipe networks can result in signifi cant water losses. Thanks to systematic monitoring of the network with Herman Sewerin’s SePem® data loggers, you can reliably identify existing leaks and catch new ones early on – much faster than with conventional methods.


In relation to the size of a measuring area, the volume of water initially escaping from a new leak is usually so low that it cannot be clearly distinguished from minimum night-time consumption when measuring the fl ow. In practice, many months often go by before the size of the damage is great enough to produce a fl ow volume that can clearly be identifi ed as a leak.


SEWERIN’s SePem® The SePem®


100/150 can report the leak after just one night. 100 data loggers with integrated aerial are perfect for mobile use in the water pipe network. They are


placed on fi ttings at measuring points in a specifi ed section of network and record the level for a programmable period of time during the night – usually half an hour. The loggers are collected in the next day. The measurement data is transmitted to the SePem®


01 Master by radio. Noticeably high measurement values indicating a leak are immediately


fl agged up by an audible signal. This is a reliable way of detecting existing leaks. The data loggers are then successively inserted in other sections of the network until the whole network has been checked.


The SePem® external aerial and are permanently fi xed to fi ttings. The SePem®


150 data loggers are designed for the stationary monitoring of water supply networks. They have an 150s record the minimum level every night for a


programmable period of time, for example half an hour. The locations are periodically patrolled, for instance daily or weekly, when the noise loggers send their data telegrams to the SePem®


More information online: ilmt.co/PL/XE66 For More Info, email:


email: For More Info, email:


01 Master. Unlike the mobile application, there


is no comparison of the absolute levels of two measuring points, but rather a relative change in the level at a measuring point means that a new leak can be very quickly identifi ed.


50342pr@reply-direct.com WWW.ENVIROTECH-ONLINE.COM AET ANNUAL BUYERS’ GUIDE 2020 50347pr@reply-direct.com sens WQ 10 measuring 48586pr@reply-direct.com


Hand-held photometers


Milwaukee handy photometers are inexpensive, have user friendly, ergonomic case design, large and easy to read display, good accuracy and immediate results.


Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater and food processing to sterilization. MW10 is for measuring free chlorine and MW11 is to measure total chlorine.


Iron is naturally present in water supplies and therefore needs to be monitored both in potable and industrial applications. Milwaukee offers the MW14 Iron meter with a range of 0.00 to 5.00 mg/L.


Phosphates are present in natural waters in levels that normally do not pose any specifi c health threats to humans. However, excessive contamination of water courses from agricultural fertilizer or wastewater/ effl uent discharge happens more and more often. Milwaukee offers MW12 with a range of 0.00 to 2.50 mg/L.


Iodine is used as disinfectant in various applications - one of the most common is the poultry industry wastewater treatment. Milwaukee offers MW13 with a range of 0.0 to 12.5 mg/L.


More information online: ilmt.co/PL/GV1A For More Info, email:


email: For More Info, email: email:


48295pr@reply-direct.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76