24
structural elements
Warmcoat Insulating Emulsion Did you know that there is a paint out there, which is proven to reduce substantial heat loss from buildings?
Warmcoat Insulating Paint from Thermilate Technologies works by creating a thermal
barrier. Warmcoat is perfect for walls and ceilings and UKAS approved laboratories confirm it eliminates condensation and mould problems too.
Recognised as a new era energy-saving product, the reduced VAT rate of 5% can be charged on all materials and labour costs by contractors. This minimal odour, incredibly low-cost insulation product is water-based and immediately reduces carbon emissions too.
t 0845 680 6124
www.thermilatetechnologies.com
enq. 146
Icynene’s green & sustainable insulation Icynene is one of the pioneers of the Green Building Movement and inventor of water blown soft foam insulation. Soft foam is the fastest growing insulation material in the world today and Icynene’s spray-in-place products give off no harm- ful emissions. Applied as a liquid, Icynene expands in seconds to fill every crack and crevice while remaining flexible so that the integrity of the building envelope seal remains intact over time. At a recent nursing home project Icynene’s insulation enabled a 40 per cent reduction in boiler
size as well as reducing traffic noise and providing better indoor air quality. It is a proven pathway to energy efficiency and reducing CO2
emissions. enq. 148
TLX helps expose Grade II virtues TLX Gold has helped maintain the original design of a now Grade II listed building, which started life in Isambard Brunel’s draw- ing office and is set to become residential and commercial space later this year. More than 500 sq metres of TLX Gold, the all-in- one multi-foil and breather membrane manufactured by Web Dynamics, has been specified for the project. At just 33mm thick, TLX Gold is sympathetic to the nature of a
project and enables renovation work to be completed with minimal disruption. Many alternatives on the market require modifications to the inside or outside profile of the roof which isn’t always an option.
t 01204 674730
www.webdynamics.co.uk
enq. 147
TeploTie insulating wall ties Ancon’s range of low thermal conductivity wall ties minimise heat loss through thermal bridging, improving the energy efficiency of a masonry cavity wall. The use of these ties can reduce insu- lation depth and wall footprint. In addition to a number of stainless steel wire wall ties, the range includes the Ancon TeploTie, which is man- ufactured from pultruded basalt fibres set in resin. This BBA-approved product is available
exclusively from Ancon. It has a thermal conductivity of just 0.7W/mK, making it the most thermally efficient wall tie on the market. It has already been used on the first certified Passivhaus to be built with traditional masonry cavity walls and the first retrofit to be built to Level 6 (Zero Carbon) of the Code for Sustainable Homes. Ancon continues to lead the wall tie industry. The company now has a BBA- approved, low conductivity wall tie for cavities from 50mm to 300mm.
enq. 149
enq. 150
...searchable information archive at
www.adfonline.eu
enq. 151
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52