This page contains a Flash digital edition of a book.
New laser doping method heightens infrared detector sensitivity FOCUS RESEARCH NEWS

A new laser doping method has been developed by researchers at five institutions, including the Massachusetts Institute of Technology (MIT) in the USA, which removes the limitations of developing a detector that is responsive to infrared light. The approach, published in January’s issue of journal Nature Communications, could be used to create new infrared imaging systems or form more efficient solar cells that harness a broader range of the Sun’s energy. Silicon, which forms the basis of most semiconductor and solar-cell technology, normally lets most infrared light pass right through. This is because the material’s bandgap – a fundamental electronic property – requires an energy level greater than that carried by photons of infrared light. ‘Silicon usually has very little interaction with infrared light,’ said Tonio Buonassisi, associate professor of mechanical engineering at MIT. Various treatments of silicon can mitigate this behaviour, but such methods have significant negative effects on the electrical performance of silicon; for example only being functional at very low temperatures. However, the new system is capable of working at room temperature and provides a broad infrared response. The approach works by implanting gold atoms into the top hundred nanometres of silicon, and then using a laser to melt the surface for a few nanoseconds. The end result produces a layer of silicon supersaturated with gold atoms. Usually, even the tiniest particle of gold can destroy the usefulness of a silicon microchip - so much so that in many chip-manufacturing facilities, the wearing of gold jewellery is prohibited. ‘It’s one of the most dangerous impurities in silicon,’ said Buonassisi. However, at the very high concentrations | @electrooptics

achieved by laser doping, gold can have a net positive optoelectronic impact when infrared light shines on the device. While others have tried similar methods with materials other than gold, the MIT team’s work is the first clear demonstration

that the technique can work with gold as the added material. ‘This is especially attractive because we can show broadband infrared response in silicon at room temperature,’ said MIT graduate student Jonathan Mailoa.

For some specialised purposes, such as a system for adjusting infrared laser alignment, it might be available relatively quickly. The approach could lead to the formation of new imaging arrays for security systems.

LASER OPTICS you know and trust

Coating Technologies IBS – Ion beam sputtering IAD – Ion assisted deposition E-beam PVD – Physical vapour deposition

High-power Laser Optics Coatings for l = 193 – 3000 nm Custom products Made in Germany Laser Optik_Anzeige_D_FR_USA_UK.indd 6 21.01.2014 09:14:28

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44