SEE US ON STAND X25
Take the Clare test Cummins expands it generator range
Pride of place on the Cummins Power Generation stand will go to the manufacturer’s new C100 D2R model, a 100kVA Stage IIIa compliant generator, specially designed for the hire market. It complements existing units from 150-300kVA which were displayed at last year’s Show. Cummins says that one of the main strengths of the
products is that they are fully integrated, as it makes the engines, alternators, controls and related sub- systems, which also facilitates service and support. The C100 D2R can be fitted with a choice of
200-litre or 400-litre tanks, typically giving 10 and 20 hours’ running time at 75% loading, and the quoted noise level is 66.7 dB(A) at 7m. Three control options are available. Cummins recently held a special launch event for the machine at its factory in Ramsgate, which has a production area covering 39,000m2
with
130 manufacturing staff, plus ten test cells. Richard Mellard (pictured) of Cummins’ Rental Power Division demonstrated the reliability of the 100kVA machine by starting it from cold and placing it immediately under full load, with the unit running steadily and maintaining constant
SEE US ON STAND D37
output throughout.
Clare’s range of electrical equipment testers for the tool hire industry includes the SafeCheck 8. Testing functions can be initiated manually or in automatic mode using simple controls with a large display providing an immediate indication of pass/fail results. In line with the recommendations of the HAE’s electrical safety code, the unit carries out the required electrical safety tests on hire tools. Also available is the compact bench-top B255, which enables a full range of tests to be undertaken, including earth/ground bond and hi-pot/flash testing alongside load, run and leakage analysis.
Boss to show latest Hybrid
SEE US ON STAND B110
Boss Cabins will display its latest Hybrid ‘Big Space’ mobile welfare cabin, a VCA-approved, road-towable unit designed to provide seating for up to 12 people, and which weighs 2000kg. The Hybrid system is configured so that the 6kVA generator operates only when under load, and for short periods of time, with the integral batteries providing power for lighting, heating and charging of laptops and similar equipment.
The unit is designed to be hard-wearing and to withstand the rigours of construction site usage, with wear pads fitted on the back and ram props supplied as standard. The interior also has surfaces that are easy to clean.
MCShashelpedWernickHire
AcrosstheUK,successfulequipmenthirerschooseMCSsoftwaresolutions. Findouthowwecanhelp youbuildamoreefficient
hirebusiness.Calluson01628828000orvisitwww.mcs.co.uk
83
SEE US ON STAND C70
achievegreatertransparency “MCS-rm has helped us make important investment decisions and brought an unprecedented degree of consistency across the business.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106