Technical Program HOYT MEMORIAL LECTURE


Tuesday, March 23 10:15 a.m. Room: S320 G/H


How Can We Become a Practical Green Foundry Industry? (10-103)


ALUMINUM


Sunday, March 21 10:15 a.m. Room: S320 B


Silver Anniversary: Aluminum Foundry Equipment Progress (10-166)


PANEL: E-357 Statistical Properties (10-165)


2 p.m. Room: S320 B


Appropriate Heat Treatment Procedures for Improving Strength and Quality in 354-Type Casting Alloys (10-039)


Sponsored Research: The Effects of Solidifi ca- tion Under Pressure on the Porosity and Mechani- cal Properties of Cast Aluminum Alloys (10-063)


Effects of Additives on the Microstructure and Tensile Properties of a New Al-Cu Based Alloy Intended for Automotive Castings (10-042)


3:45 p.m. Room: S320 B


Effect of Zr Addition, Aging Treatment on the Mechanical Performance of Al-2%Cu Base Alloys (10-040)


Zirconium-Scandium Interactions in Al-2Cu Base Alloy (10-041)


Poisoning in Grain Refi nement of A319 Alumi- num Alloy and its Effect on Hot Tearing (10-065)


Monday, March 22 8:30 a.m. Room: S320 B


Sponsored Research: Energy Effi cient Melting, Transportation, and Holding in Aluminum Casting Operations (10-084)


Mechanical Properties and Machinability of an Al-16 wt. % Si Alloy Modifi ed by 0.5 and 1.0 wt. % Bi (10-032)


Prediction of Microstructure and Mechanical Properties in Aluminum Castings After Heat Treatment (10-033)


2 p.m. Room: S320 B


The Effects of Non-Contact Acoustic Stimulation on the Solidifi cation Behavior and Microstructure of Aluminum Alloy A356 (10-088)


54 CAST IRON


Saturday, March 20 2 p.m. Room: S320 A


Lustrous Carbon on Gray Iron (10-136)


Solidifi cation Pattern of Un-inoculated and Inoculated Gray Cast Irons in Wedge Test Samples (10-010)


Sponsored Research: Aging Effect on Gray Cast Iron Machinability: Importance of Microstructure (10-035)


3:45 p.m. Room: S320 A


PANEL: CSI: Foundry. Practical Aspects of Casting Defects Resolution (10-123)


Sunday, March 21 8:30 a.m. Room: S320 A


PANEL: Trace Elements in Cast Iron Review of Vanadium, Niobium, Antimony, Tin, Nitrogen and Titanium; Summary Reference Sheet Overview of Additional Elements (10-113)


Monday, March 22 8:30 a.m. Room: S320 A


Sponsored Research: Casting Skin of Compacted Graphite Iron Part I: Evaluation and Mechanism of Formation (10-067)


Sponsored Research: Casting Skin of Compacted Graphite Iron Part II: Infl uence on Tensile Mechanical Properties (10-068)


Sponsored Research: Effect of Cooling Rate on the Mechanical Properties of a Fully Pearlitic Ductile Iron (10-003)


2 p.m. Room: S320 A


Ductile Iron Characteristics and Impact Strength at Low Temperature (10-014)


Sponsored Research: Aging, Machinability of Irons with Compact and Spherical Graphite (10-036)


Sponsored Research: Monotonic and Cyclic Property Design Data for a 25% Cr Abrasion- Resistant Cast Iron (10-128)


Confl uence Welds in Aluminum Castings – Part Two (10-053)


3:45 p.m. Room: S320 B


PANEL: Interim Report: AFS Project on Optimization of Mechanical Properties in Cast Aluminum Alloys (Phase I A356) (10-125)


(as of Feb. 22)


10:15 a.m. Room: S320 A


Honorary Lecture: Overview of Age Strengthening of Cast Iron (10-146)


3:45 p.m. Room: S320 A


PANEL: Aspects of Measuring Nodularity in Ductile Cast Iron (10-126)


Cast In North America Buyer/Designer Sessions


Saturday, March 20 2 p.m. Room: S320 F


How to Identify a Quality Casting Supplier (10-169)


Casting Simulation: A Primer for Casting Buy- ers & Designers (10-133)


3:45 p.m. Room: S320 F


A Buyer’s & Designer’s Intro to Metalcasting Processes & Alloys (10-170)


Sunday, March 21 2 p.m. Room: S320 F


Cost-Effective Casting Design: A How-to for Designers and Purchasers (10-131)


3:45 p.m. Room: S320 F


Designing With Austempered Ductile Iron (10-129)


Designing Aluminum Casting Success (10-171)


Monday, March 22 2 p.m. Room: S320 F


Designing Ductile Iron Success (10-173)


3:45 p.m. Room: S320 F


Identifying a Candidate for Conversion to Casting (10-172)


Continuous Cast Ductile Iron as an Alternative to Wrought Steel (10-144)


MODERN CASTING / March 2010


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92