search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
The Transfer Print Column Best practices for heat presses


Andy Rogers, marketing manager at Target Transfers, outlines in this month’s transfer print column the best practices for looking after your heat press and getting the best transfer results.


Follow instructions


The key to a successfully decorated garment lies in proper application. Always follow the application instructions included with your custom transfers or heat transfer vinyl. The instructions do not change based on what you are applying to. In this case, if your apparel is unique, you may need to change the transfer or heat transfer vinyl type, not the instructions.


Always remember to pre-press your garment, it is important to remove moisture from the material and create a surface without imperfections to get the best possible finish. We recommend a pre-press of five seconds. Top tip: Time, temperature and pressure are the most important values to know, no matter what youʼre heat applying.


Cool down your heat press


We sometimes hear from customers who tell us their heat transfer vinyl is falling off. After a little troubleshooting we often learn theyʼve applied their materials at too high a temperature, for too much time with too much pressure. Itʼs a misconception that if some heat is good, more is better. As the industry moves away from 100% cotton or cotton/poly blends, you can no longer smash on transfers and vinyl at 200°C and hope it wonʼt ruin the garment. Hot melt adhesive is designed to adhere under specific conditions. If too much heat is used the adhesive will literally burn off without proper adhesion.


Combating dye migration


Dye migration, or bleeding, occurs when the ink used to dye the fibres of a polyester garment are reheated to temperatures above 140°C. At this temperature the inks are reactivated and released from the fibres. When they are released the dyes will come through heat transfer vinyl and cause discolouration, like a faint red (or pink) number on a red jersey. Check the label to determine the polyester content in the performance fabric youʼre applying to and determine whether you have a low-bleed polyester or a high-bleed polyester. Always test your application before completing a job. With the industryʼs move toward high-tech, sublimated, and performance fabrics – work with your transfer and heat transfer vinyl partner to get low-temperature adhesives, heat transfer materials, and heat press technology to deal with migrating dyes from these fabrics.


Use the right tools


●Quick change heat press platens Heat press platens come in a variety of sizes for different purposes. Using the right heat press platen on your garment means you get heat only where you need it reducing the chance of scorching while ensuring a good application. Try getting one to do small logos, legs and sleeves or even trainers.


It’s a misconception that if some heat is good, more is better


When dealing with fabrics that can scorch, always use the lowest recommended temperature for the material youʼre applying to.


Common mistakes: ● Temp too high ● Too much time ● Too much pressure


Read your care label


Performance fabrics, like nylon or lycra/spandex, require special consideration when heat applying. Too much heat ruins garments by leaving scorch marks and the dreaded heat press box. Before decorating itʼs important to read and understand a garmentʼs care label. The garment's label will tell you its fibre content along with the percentages of each type of fibre.


It's important to know these values so you can choose your heat transfer vinyl or transfer type based on the highest percentage on the label. For example, if your shirt's care label lists the fibre content as 30% polyester, 20% rayon, and 50% spandex, choose heat transfer material based on the spandex.


| 60 | May 2019 ●Platen covers


Putting a protector on your lower platen will make it easier to clean. Ensuring the integrity of the garment by placing it on an area removed of imperfections. A protector with a smooth finish will make it easier to place and remove your garments from the press. When decorating sportswear, an upper platen cover (usually silicone) attaches to the upper platen of the heat press and helps reduce marks and indentation on heat sensitive materials like polyester, neoprene, and spandex. The silicone upper platen cover alters the heat delivered to the application. It's recommended you test the transfer and garment for wash durability after application. As a general rule, add approximately 10-20 seconds to the application to achieve success.


●Lower heated platens


This platen heats the underside of a threaded garment, so less heat is required on the outer facing fabric. Heat applied from underneath melts the adhesive from below, reducing the risk of scorching performance wear fabrics.


●Heat pillows


If you are decorating a garment with zips or intricate details that needs protecting. A heat pillow is the way forward. By placing a pillow under a particular area of your garment. You can raise the area for fusing and ensure only this area of the garment receives heat on it.


www.printwearandpromotion.co.uk


Using the right heat press platen on your garment means you get heat only where you need it


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88