| 67
Above left: SEMA wants to advise the timber industry on meeting racking safety regulations Above right: Once in place, the racking user is responsible for ensuring any damage on the storage equipment is recorded and actioned
in conjunction with the aforementioned legislation, as a framework to bring action against your business. To adopt a safe culture, you need to be aware that racking follows a circular lifespan. These are the key areas covered by HSG76 and SEMA advice: 1. Racking design: As an engineered structure, the design of your racking must fulfil set criteria to ensure the structure is suitable for its intended purpose. HSG76 expects that “Racking systems should be of good mechanical construction, of sound material, adequate strength and installed and maintained in accordance with the manufacturer’s instructions”. To ensure racking meets these conditions, racking suppliers should work to design codes. These provide guidance to suppliers on how to do the structural analysis, the types of loads you must consider, how to test components and what factors of safety you require. In the UK, suppliers work to nationally recognised design codes such as the various SEMA codes or BS EN codes.
2. Racking installation: HSG76 very clearly stipulates key considerations for the installation of your racking and states that “Racking should be erected on sound, level floors, capable of withstanding the point loading at each base plate. Aisles should also be wide enough to ensure that mechanical handling equipment can easily manoeuvre”. It also asks that “The racking should only be installed by competent people in accordance with the manufacturer’s instructions”. To help business owners meet HSG76 requirements, SEMA developed the Storage Equipment Installers Registration Scheme (SEIRS). This initiative aims to raise installation standards by instructing installers on correct and safe installation methods in line with SEMA standards. SEIRS is also referenced in HSG76.
3. Racking usage: Once in place, the racking user is responsible for ensuring any damage on the storage equipment is recorded and actioned. HSG76 recognises that, in many cases, racking is manufactured from thin gauge high strength steels with a limit to the amount of abuse it can withstand. Any amount of damage to the racking can significantly reduce the load-bearing capacity and stability of the structure. To ensure the racking remains serviceable and safe, HSG76 follows SEMA guidance by recommending regular inspections. The inspection process starts with employees who work in areas with racking immediately reporting any issue with the structure. They should receive training on how to identify damage to the equipment and the correct steps to report the issues. This is followed up every week with a visual inspection undertaken by a member of your team which, in HSG76 is known as a ‘Person Responsible for Racking Safety (PRRS)’. They will check the use of the racking and that maximum loads are never exceeded. They will also identify and report any damage for action.
As referenced in HSG76, a rack safety awareness course is available through SEMA, which not only trains for the role of PRRS but ensures anyone working in areas with racking can identify and report damage.
4. Inspection: The inspection process is completed with the Expert Inspection. Carried out at intervals of no more than 12 months, HSG76 asks that the inspections are “carried out by a technically competent person”. The inspector should issue a detailed written report outlining observations, recommendations and proposals for any necessary remedial work. To support this, we operate our SEMA Approved Rack Inspector (SARI) initiative. This scheme consists of highly qualified
professionals who must successfully pass an intensive three-day training course, written exam, and practical assessment to achieve their qualification. Warehouse owners should be aware that there are two different types of inspection available. A “damage only” pallet racking inspection provides a list of damaged items and their location while a SARI report offers far more useful detail. To avoid inspectors who ‘claim’ to conduct SARI inspections, we always advise checking the credentials of your SARI inspector by asking to see their card.
HOW TO FIND A RACKING SUPPLIER With so many areas to cover, it can be hard to know which racking supplier will ensure you are meeting your requirements, especially in an industry where there are few barriers to entry. A lot of the regulation now expects the owner of the racking to check the credentials of the company they work for – a time- consuming process. To provide a clear benchmark within the industry, SEMA set out to rigorously check the credentials of its members and provide reassurance for the market.
SEMA is made up of storage equipment manufacturers, suppliers, installers and inspectors who want to raise the standard of quality and safety within the industry. To join, each member must undergo a tough audit process which checks they meet HSE and industry requirements and show a commitment to using SEIRS racking installers and SARI inspectors. ■
FURTHER INFORMATION
If you’d like more advice about working with a SEMA member, contact us by emailing
enquiry@sema.org.uk or visiting
sema.org.uk
www.ttjonline.com | November/December 2024 | TTJ
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89
