Sector Focus: Handling & Storage | 63
EXTRA SENSORY PERCEPTION
HUBTEX has introduced the industry’s first sensory aisle entry assistant, allowing precise entry into narrow-aisle warehouses without damaging racks or goods
By using multi-directional sideloaders in narrow-aisle warehouses, companies benefit from maximising their storage capacity in confined spaces. However, operators face challenges with this warehouse layout, one of which is entering the narrow aisle with pinpoint accuracy. To overcome this challenge, HUBTEX has developed the industry’s first sensory aisle entry assistant, enabling equipment handling long goods to enter aisles without collision. All PhoeniX models can be equipped with the new assistance system.
The principal working environment of multi-directional sideloaders is narrow aisles. Guide rollers with corresponding rails mounted to the rack are the dominant method to keep the forklifts on track.
Just four inches is the distance between the sideloader and the rack. Facilitating the approach into the aisle is usually a funnel
whose size is determined by the length of the transported goods. Long loads lead to long funnels, resulting in wider transfer aisles. Entering a narrow aisle without assistance always poses a challenge for operators. If there is only a small deviation from the right path, the sideloader, its load, the rack or the rails could be damaged. Overhanging loads and reverse entry don’t help the situation either.
HUBTEX has long recognised this challenge and now offers a solution through innovative sensor technology.
ASSISTANCE WHEN IT IS NEEDED The system processes the raw data of a 2D lidar sensor. The laser scanner determines the relative distance to the entry funnel and orients the vehicle to the centre of the aisle. “Based on this information, the assistance system aligns the truck centrally in front
of the aisle and parallel to its course,” said Michael Röbig, head of product management at HUBTEX. “The truck can therefore enter the aisle without colliding. This allows the driver to concentrate on monitoring the vehicle’s surroundings and set a speed appropriate to the situation.”
There are two versions available: a stand- alone system and an integration into the pedestrian safety system. The big advantage is that if a bystander safety system has already been installed, the same sensors can be used to enter the aisle. Dual use of the existing hardware results in cost advantages for the aisle entry system.
The patented automated aisle entry system helps save money by minimising damage to loads, racking, and the sideloader. Additional costs can be saved when planning new rack systems as the entry funnels can be designed less robust. ■
Above: Easy entry into rail-guided aisles, especially if the driver can’t see the rails because of long loads
www.ttjonline.com | November/December 2024 | TTJ
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89
