New Viscometer SVM 1101 Simple Fill from Anton Paar


Anton Paar has launched the brand new SVM 1101 Simple Fill viscometer, which offers standards-compliant density and non-standards-compliant viscosity analysis at a competitive price. The basics


The instrument is easy to use. With the Simple Fill funnel, operators do not need a syringe to load the sample. It weighs just 6.5 kg, consumes only 75 W of power and can even be run on batteries, making it a truly portable instrument. In this price and precision category, such a level of energy efficiency and off-grid operation is unmatched.


Compliant and cost effective


SVM 1101 Simple Fill delivers fully ASTM D4052- and ISO 12185-compliant density measurements in combination with fast viscosity results. The semi-automatic measurement means it is easy and cost- effective to operate.


Easy to clean and fast


The instrument has automatic cleaning and drying with a built-in air pump, which prepares the instrument for the next test. There’s only two minutes of operator time per measurement, very little training is required and the error rate is low. This is not least due to the FillingCheck™ feature, which ensures accurate filling every time.


The future of viscometery


Discover the power of SVM 1101 Simple Fill, embrace the freedom of portability, enjoy unparalleled precision, and contribute to a greener future. SVM 1101 Simple Fill: Welcome to New Viscometry. More information online: ilmt.co/PL/A6J7 For More Info, email:


61640pr@reply-direct.com


Anton Paar’s Diana 700 & 300 Distillation Analyzer: Perfection


email: from the First Drop


For More Info, email: email:


Atmospheric distillation is one of the


most important testing


For More Info, email: email:


methods in the process of refining crude oil into fuels or other petroleum products. Determining the boiling range of each distillation cut has major financial implications since it allows for an increase in output from the distillation tower and thus in the volume of final products.


Anton Paar’s Diana 700 distillation analyzer, the high range distillation unit to entry-level alternative Diana 300, that nonetheless boasts the same fuel distillations range and safety levels, ensures safety from the first drop.


The Diana series delivers the accuracy you need to analyze your products and maximize yield. The testing procedure and results comply with ASTM D86, ASTM D850, ASTM D1078, ISO 3405, IP 123, IP 195, JIS K 2254, and GOST 2177.


Both the Diana 300 and the Diana 700 cover an array of fuel samples (100 % fossil and blended fuels, like bio-fuels). Diana 700 maximizes throughput thanks to accelerated liquid-free Peltier cooling for uninterrupted measurements.


Diana 300 and Diana 700 put a premium on safety. They come with a fire sensor and an internal fire extinguisher, initiated automatically or with a button and additional other saftey features. Diana 700 and Diana 300 help refineries get the most out of their crude oil. They can be used at tank terminals, refineries, transportation companies, and independent labs – generally, any companies that handle fuels and solvents.


More information online: ilmt.co/PL/vzWR 61641pr@reply-direct.com


For More Info, email: email:


www.anton-paar.com


For More Info, email: email:


For More Info, email: email:


Anton Paar Launches New Abel and TAG Flash Point Testers:


ABA 500, ABA 300, TAG 500, and TAG 300 Anton Paar just launched Abel and TAG flash point testers that are the perfect choice for petro and petrochemical samples. They comply to many standard methods, such as ISO 13736, IP 170, ASTM D56, ISO 1516, and ISO 1523.


Long lifetime


The new generation of flash point testers feature Anton Paar’s market-leading ceramic-coated electric igniter, which has a lifespan more than 10x longer than comparable products on the market.


Wide temperature range


The unique 2-in-1 cooling technology of the ABA 500 and TAG 500 combines a liquid and air-cooled system in one instrument, which lets the flash point measuring range reach from -30 °C to +130 °C. Users just have to connect an external cooler when measuring flash point temperatures from -30 °C to +65 °C and disconnect it when they measure flash points from 10 °C to 130 °C.


With the ABA 300 and TAG 300 Anton Paar offers budget-friendly solutions perfectly suited for flash point measurements between 10 °C and 110 °C. Intuitive instruments, new features


Due to an intuitive user interface, easy cleaning, and strong safety features, Anton Paar’s new Abel and TAG flash point testers are the first choice on the market. Users benefit from a range of great features like a status light, quality control charts, and impurity matrix. These next-generation flash point testers support LIMS and can be used with AP Connect, Anton Paar’s lab execution software.


More information online: ilmt.co/PL/4mBl For More Info, email:


New High-Temperature Rotational Viscometer from Anton Paar email:


For More Info, email: email:


For More Info, email: email:


Automated ASTM D4402


You can set up customized measuring methods for automated testing with temperature and/or speed scan steps. All that, simply and intuitively via the ViscoQC display. A special highlight is the ready-to-use ASTM D4402 method. You can run a fully automated and compliant test without the need for any further interference, which frees up valuable operator time.


Easy handling, accurate measurements


Magnetic coupling enables easy and safe attachment/detachment of the spindle, while the automatic spindle recognition diminishes the possibility of a wrongfully selected spindle geometry. The ViscoQC with ETD 300 is a self-centralizing measuring setup, meaning the spindle and the cup are always in the same and correct position, for accurate and repeatable measurements.


More information online: ilmt.co/PL/m4mk For More Info, email:


email: For More Info, email:


Asphalts, bitumen, hot melts, waxes. These are solid in their aggregate state and must be heated to higher temperatures for processing. With Anton Paar’s new ETD 300, you can now perform viscosity tests at elevated temperatures ranging from 25 °C to 300 °C and be fully compliant with important standards like ASTM D4402, D3236, AASHTO T316, EN 13302, and more.


T-ReadyTM : Precise temperature control


One of the most common reasons for bad reproducibility when performing viscosity measurements is the imprecise temperature control. The unique T-Ready feature signals when the sample has truly reached the set temperature, guaranteeing measurements always at the correct temperature.


61642pr@reply-direct.com


61643pr@reply-direct.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88